How do you reset the filter light on a Thermador hood?
How do you reset the filter light on a Thermador hood?
After 40 hours of operation, the LED above the Filter button will illuminate indicating that the filters need to be cleaned. When this indicator illuminates, clean the filters as instructed on page 8. After cleaning, press this button for 3 seconds to reset the 40-hour period and turn the LED off.
How do you clean Thermador hood grease filter?
How to Clean the Grease Filters in Your Kitchen Hood
- Turn off the hood and make sure it has completely cooled before beginning.
- Review your owner’s manual to learn how to remove the grease filters.
- Wash the filters with hot, soapy water.
- After washing, make sure to dry the filters thoroughly.
Why is my range hood light blinking?
Although uncommon, is can be normal for the lights on a hood to flicker. Voltage going to the lamp while the vent is on the LOW setting passes through an electronic component called a diode. The diode cuts the power by half to achieve the dimmer setting. The flicker is a very, very fast flicker.
How do you reset a grease filter on a range hood?
Press and hold the H button. The # button flashes 3 times. The saturation indicator for the metal grease filter and for the activated charcoal filter is reset.
How do I clean my Thermador range hood fan?
Non-Stainless Steel Surfaces – To effectively clean the outside of your stove or range hood, wipe the surface with warm, soapy water and a soft cloth. Dry with a soft cloth. Do NOT use abrasive cleaners and cloths.
How often should you clean range hood filter?
At a minimum, your range hood filter should get a thorough cleaning once a year. However, how often your filter needs to be cleaned really depends on how much cooking you do. If you cook every day, your filter should be cleaned far more often than someone who only cooks every once in a while.
What is the best way to clean a downdraft filter?
To remove and clean the filters: Push down on the filter frame (grille) while pulling the filter out away from the Downdraft. Filters may be placed in a dishwasher or hand washed with a mild detergent or spray degreaser. When filters are dry, install using the reverse procedure.
How do you clean a downdraft vent?
Soap, water, and a soft cloth or sponge are suggested first unless otherwise noted. Wipe clean or wash in the sink: Use nonabrasive scrubbing pad and mildly abrasive cleanser. Rinse with clean water and dry with a soft, lint-free cloth. Dishwasher: Use mild detergent.
How do you reset the filter light on a wolf hood?
To reset the filter status light:
- Verify the hood lights and blower are turned off.
- Press and hold the “3” key for 5 seconds.
