What is the smallest hex key?

In addition to the precision sizes mentioned above, the common metric Allen wrench sizes are 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, & 10 mm.

What is the smallest Allen key you can get?

Sizes contained in the set are 0.71mm , 0.89mm (the two smallest hex keys in this set are metric) – then 1.27mm (0.05″), 1/16″; (1.59mm), 5/64″ (1.98mm), 3/32″ (2.38mm) and 7/64″ (2.79mm). Supplied in a handy plastic holder.

Are hex and Allen the same?

Nowadays, there are many instruments to choose from. This article is aimed to help you figure out the difference between an Allen wrench and a hex key. The short answer is “there is no difference”. Really, these two names can be used interchangeably.

What to do if you don’t have a small enough Allen key?

A good example for smaller allen wrench nuts, you could likely use a set of flat-tipped tweezers, or even the flat edge on a pair of finger nail clippers. There are numbers of bathroom items that can be used in such cases, and again it is about being able to turn or spin this screw, nut or bolt to get it loose.

What are tiny Allen wrenches used for?

A hex key, also known as an Allen key or Allen wrench, is a small handheld tool that’s used for for driving bolts and screws with a hexagonal socket. They are available in many different sizes, though they all have the same hexagonal-shaped tip.

What is SAE hex key?

Hex keys are used to drive bolts and screws and are often found in machinery and construction settings. SAE Hex Key Sizes: .050″, 1/6″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, & 5/16″ MM metric hex bit sets.

Is torx better than hex?

In order for a hex head to work and not strip out it requires quite a bit more depth for the head, the torx requires about 30 to 50% less depth. So they are well suited to applications that require a thinner bolt head to prevent clearance issues. This is the primary reason they are used as rotor bolts.

How do you remove a hex screw without a hex key?

How to Remove Allen Head Screws Without an Allen Head Screwdriver

  1. Try to find a standard screwdriver that fits snugly between two of the points of the screw. It should fit with no wiggle room.
  2. Get your hacksaw. Put a small toothed blade on the saw.
  3. Use a standard screwdriver that fits the groove you just made snugly.

Can you use a drill instead of an Allen key?

Converting an Allen wrench into a drill When putting together boxed furniture, you can convert an Allen wrench into a drill bit. You require an Allen wrench, a pair of pliers, and bolt cutters.