How do I set up comtrend AR-5381u?

Configuring the Comtrend AR-5381U Router

  1. From a web browser, go to “http://192.168.1.1”.
  2. Click the “Advanced Setup” link on the left.
  3. Click on the “WAN Service” link on the left.
  4. Click on the “Edit” button on the row beginning with “ppp0”.

How do you reset a comtrend AR-5381u?

Reset the Comtrend AR-5381u router paperclip or a pen to press the button. Press and hold the button for 20 seconds, the router will restart and reset to the factory settings. Note! After Comtrend AR-5381u has been reset, all settings that apply to the connection and the network must be reconfigured.

What is the default password for comtrend router?

Use Default Login Info to Access Your Comtrend Router Usernames: admin, root. Passwords: admin, root, 1234, 12345. If none of these work, you will have to reset your router to its factory configuration.

How do I access my comtrend router?

Type 192.168. 1.1 (the most common IP for Comtrend routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Comtrend router is root.

How do I change my WIFI password comtrend?

How do I change the wireless information on my ComTrend Router?

  1. Enter 192.168. 1.1 in your address bar. Enter Username and Password. Username: root.
  2. Click on Basic Setup. –
  3. Click on Wireless. –
  4. Enter your new SSID (router name) Click Apply/Save. –
  5. Click Security. Enter password of your choice. Click Apply/Save. –

How do I reset my ComTrend?

(1) Do a hard reset by holding the Config Reset Button down for about 10 seconds (the amber AP light starts to flash but keep the button pressed until it stops flashing) then release button. You get 1 red light on (Status) once reset is finished.

Where is the WIFI password on a Comtrend router?

1.1 (the most common IP for Comtrend routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Comtrend router is root. The default password is 12345.

How do I turn on WPS on my Comtrend router?

Press the WPS button (often the WPS/Reset button) on your router/access point to activate WPS. Note: Please check the instructions for your wireless router/access point for how long you need to hold down its WPS button to activate WPS.

How do I access my Comtrend modem settings?

What are the features of the ar-5381u?

The AR-5381u is an IPv6 compliant, high performance 802.11n, 4-port Ethernet ADSL2+ Router with full routing capabilities to segment and route IP protocol. It features TR-069/098/111 and TR-068 compliance for hassle-free setup and configuration.

How many Ethernet ports does the ardar-5381u have?

AR-5381u has four 10/100 Base-T Ethernet ports, a Wi-Fi Protected Setup (WPS) button and a Wi-Fi switch button, one USB Host, and is backward compatible with existing 802.11b (11Mbps) and 11g (54bps) equipment.

How do I update the firmware on my ar-5381u?

NOTE: If pressed down for more than 60 seconds, the AR-5381u will go into a firmware update state (CFE boot mode). The firmware can then be updated using an Internet browser pointed to the default IP address. fFRONT PANEL The Wi-Fi & WPS buttons are located on the bottom-left of the front panel, as shown.

How do I restore the default configuration of the ar-5381u-na2?

The factory default configuration can be restored either by pushing the reset button for more than five seconds until the power indicates LED blinking or by clicking the Restore Default Configuration option in the Restore Settings screen. 3.2 IP Configuration DHCP MODE When the AR-5381u-NA2 powers up, the onboard DHCP server will switch on.