Why does my miter saw have a stop at 31.6 degrees?

Tilting and rotating a miter saw allows you to make a right-angle joint with a wide piece of crown molding. Many saws have a detent at 31.6 degrees for making this cut. PHOTO 4: Saws with tall fences and stops are best for cutting crown molding in an upright position.

Why does crown molding have to be cut upside down?

Chris Marshall: Crown molding is typically cut upside down on a miter saw so the narrow edge that will rest against the wall butts against the saw fence and the top edge of the molding that will meet the ceiling rests on the saw table.

What angle do you cut crown?

Crown Moulding Scarf Joint Two pieces are cut at opposing 45-degree angles and overlap to create a splice. Swing the blade of the miter saw 45 degrees to the left. Place the first piece of moulding upside down on the saw with the scrap end to the right.

What are positive stops on a miter saw?

Positive stops are factory set points that let you quickly make precise cuts on specific angles. More positive stops decrease the time needed to set up cuts. Some saws feature thumb-activated stops for quick adjustments.

What angle do you set a miter saw for crown molding?

Best Practices for Cutting Crown Moulding A power miter saw is the best way to cut crown moulding once you measure the angles. The saw can be adjusted to cut at any angle – set it to 45 degrees for one side of a standard 90-degree corner. The saw can be set to 45 degrees to the left or 45 degrees to the right.

How do you cut crown molding flat on a compound miter saw?

Steps for Cutting Crown Molding

  1. Step One: Set the miter angle to 31.6 degrees. On most saws, “31.6” is specially marked.
  2. Step Two: Set the bevel to 33.9 degrees. Once again, this adjustment will have a special marking on most saws.
  3. Step Three: Lay the crown flat and cut.
  4. Step Four: Reverse the settings and repeat.

What angle do I set my miter saw at for crown molding?

How do you cut a 45 degree corner on crown molding?

A power miter saw is the best way to cut crown moulding once you measure the angles. The saw can be adjusted to cut at any angle – set it to 45 degrees for one side of a standard 90-degree corner. The saw can be set to 45 degrees to the left or 45 degrees to the right.

What kind of miter saw is Bosch cm10gd?

Dual-Bevel Glide Miter Saw Bosch CM10GD 10 In. Dual-Bevel Glide miter saw delivers accuracy and cutting control at all angles, as well as durable precision throughout the life of the tool.

What is an adjustable miter detent?

Adjustable miter detents – designed to be accurate and durable, and includes detents at 0°, 15°, 31.6°, 22.5°, 45°, 60° Push-button miter detent override – provides easy-to-access thumb actuated control right up front for fine miter angle adjustment

Why choose dual-bevel glide miter saws?

Dual-Bevel Glide miter saw delivers accuracy and cutting control at all angles, as well as durable precision throughout the life of the tool. The innovative Axial-Glide System provides wider cross-cuts, enhanced alignment and smoother glide, and the compact design takes up to 10 In. less front-to-back workspace than a slide miter saw.