Can you put leaf springs on top of axle?

Can I Put the Leaf Springs on Top of the Axle to Give me More Tire Clearance. Expert Reply: Yes, you can move your springs on top of the axle to gain more tire clearance. Doing this will raise the height of your trailer by the height of your axle and the thickness of your leaf springs.

What is Overslung?

: supported at a level above that of the wheel axles an overslung automobile —opposed to underslung.

Why is solid axle better than ifs?

A solid axle has less moving parts and is easier to service, with no crossmembers clogging everything up. I also don’t like that the centersection in many new IFS rigs is made of aluminum. Solid-axle centersections are typically cast iron, which is more durable.

Can you change IFS to live axle?

A live-axle conversion aims to fix both of these issues by physically replacing the complicated IFS set-up with a much simpler and stronger live axle. The process in theory is simple: the vehicle is put on a hoist, the original suspension removed and the chassis rails ground clean.

Should leaf springs be above or below the axle?

Helpful Expert Reply: You can mount trailer axles above or below the leaf springs. The difference is just the amount of ground clearance that the trailer would end up having. The biggest advantage with the spring below the axle (trailer will be lower) is that you would have a lower center of gravity.

Should you flip your trailer axles?

If your trailer travels securely on the road at all times, flipping the axles will not be a cause for concern. But if your trailer is sensitive to sway or has stability issues even on a good day, flipping the axles may not be such a good idea until the root cause of the poor ride has been fixed.

Can you Oversling a drop axle?

can I do a spring over conversion with this type of axle? Expert Reply: You can convert your drop axles to get more height by attaching your leaf springs to the top of the axle. The height you gain will be the thickness of your leaf springs and the diameter of your axle.

What are underslung leaf springs?

Axles with springs mounted below the axle are referred to as underslung, and axles with the springs above are overslung. The difference between overslung and underslung (other than the spring position) is the location of the spring seat, as well as the orientation of the U-Bolt and other hardware.

What is a SAS swap?

A “solid axle swap” refers to replacing Independent Suspension with a solid or beam axle. There is still an operational differential.

Is it hard to do a solid axle swap?

Now, a solid axle swap is not exactly an easy feat. But for those with the right skill set or will to learn, it’s definitely doable. Despite the old Toyota IFS being a great system, it lacks wheel travel and articulation. That’s why this serious off-roader opted for a solid axle swap.