How do I calibrate my Vantage Pro 2?

You can calibrate inside & outside temperature, inside & outside humidity, as well as any extra temperature/humidity sensor readings you have transmitting to your Vantage Pro2. Select a variable to be calibrated. Press and release 2ND, then press and hold SET.

How do I reset my Vue weather Vantage?

The Vantage Vue weather station console does not have a reset button. To reset it, remove all power sources, both the AC-power cord and batteries. You should leave it disconnected for 10 to 20 seconds and then repower the unit to restart it.

How do you calibrate a humidity sensor?

How do I calibrate the Relative Humidity Sensor?

  1. Place a handful of salt in the bottom of a jar (quart or liter size is fine).
  2. Add a little water to the jar so that the salt is wet.
  3. Place the Relative Humidity Sensor in the jar.
  4. Seal the jar.

How do I calibrate my Vue Davis Vantage?

Vantage Vue.

  1. Select the temperature or humidity variable to be calibrated.
  2. Press and release 2ND, then press and hold SET. After a moment, the variable you’ve selected will begin to blink.
  3. Press the + or – keys to add or subtract from the temperature offset value.
  4. Press DONE to exit calibration.

How do I change the battery in my Vantage Pro 2?

Davis Vantage Pro2 Low Battery on Station 1 – What Can Be Done?

  1. Step 1: Locate the position of the battery cover.
  2. Step 2: Remove the battery cover.
  3. Step 3: Remove the old batteries from the battery slot.
  4. Step 4: Install the three C-Cell new batteries carefully.
  5. Step 5: Reinstall the battery cover.

Where can I find the manual for Vantage Pro 2 weather stations?

For Vantage Pro2 & Vantage Pro2 Plus Weather Stations™™ Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545 • 510-732-9229 • www.davisnet.com Vantage Pro 2 Console Manual

How do I calibrate my vantage Pro2 with weather variables?

You can calibrate inside & outside temperature, inside & outside humidity, as well as any extra temperature/humidity sensor readings you have transmitting to your Vantage Pro2. 1. Select a variable to be calibrated. See “Selecting Weather Variables” on page 18. 2. Press and release 2ND, then press and hold SET.

What is apparent temperature vantage Pro2?

Apparent Temperatures Vantage Pro2 calculates three apparent temperature readings: Wind Chill, Heat Index, and the Temperature/Humidity/Sun/Wind (THSW) Index. Appar- ent temperatures use additional weather data to calculate what a human body perceives the temperature to be in those conditions.

What kind of problems do you have with the vantage Pro2?

Vantage Pro2 Troubleshooting Guide 35 Troubleshooting Reception Problems While we have tested the Wireless Vantage Pro2 radio extensively, each site and each installation presents its own issues and challenges. Obstructions, par- ticularly metallic ones, often cut down your station’s reception distance.