How do you remove a Kwikset Titan deadbolt?

Tip

  1. Open the door and insert the key into the deadbolt lock. Turn the deadbolt to the “Lock” position with the bar extended from the door.
  2. Remove the screws from the interior portion of the deadbolt.
  3. Hold on to the other side of the deadbolt.
  4. Remove the mounting screws from the door jamb deadbolt plate.

How do I remove my Kwikset deadbolt?

  1. Pry off the inside deadbolt cover using a small flat-blade screwdriver.
  2. Remove the two mounting screws from the interior cover using the Phillips screwdriver.
  3. Remove the two screws that hold the latch in place with the Phillips screwdriver.
  4. Remove the deadbolt latch by sliding it out the side edge of the door.

How do you remove a Kwikset front door lock?

How to Remove a Kwikset Laurel Door Knob

  1. Loosen the outer ring.
  2. Grab the knob handles on both sides of the door and simultaneously turn both handles clockwise.
  3. Loosen both screws on the inside of the knob mechanism.
  4. Unscrew the latch from the side of the door.

How do you remove a Kwikset door lock?

To stabilize the door when you want to remove a deadbolt,you should prop open the door.

  • With the right screwdriver,the two mounting screws should be lost and removed.
  • Hold the exterior or outer side of your door deadbolt.
  • Have the exterior lock pulled out and away from your door.

    • How to disassemble a Kwikset lock?

    Remove a Kwikset Knob Lock Set With No Screws and No detent, The Secret “Catch”. If you have ever came to a Locks that had no screws, no set screw, and no de…

    How to remove Kwikset?

    Removing a Kwikset deadbolt is a question often asked by homeowners. Removing a Kwikset deadbolt is accomplished by accessing the screws that hold the lockset in place. On some models of Kwikset deadbolts, a rose plate hides the screws. Removing the rose plate exposes the screws and makes unmounting the lockset relatively easy.

    How to remove a Kwikset Laurel door knob?

    – Open the door part way. – Locate the small setscrews or hex bolts at the inner portion of each door knob. – Pull out both sections of the broken spindle from the door lock. – Fit one end of the new spindle fully into the square port at the inner end of a door knob.