How do I troubleshoot no bootable device insert boot disk and press any key?

Table of Contents

  1. User Case.
  2. How to Fix No Bootable Device Insert Boot Disk and Press Any Key. Fix 1. Change the Boot Mode to UEFI. Fix 2. Take Out CMOS Battery to Make the Device Back to Factory Settings. Fix 3. Reset the Boot Manager via Command Prompt. Fix 4.
  3. Best Way to Protect System from Failing to Boot Again. Summary.

What to do if there is no bootable device?

How to fix no bootable device on Windows 11/10/8/7?

  1. Method 1. Remove and connect back all hardware components.
  2. Method 2. Check boot order.
  3. Method 3. Reset primary partition as active.
  4. Method 4. Check internal hard disk status.
  5. Method 5. Fix boot information (BCD and MBR)
  6. Method 6. Recover deleted boot partition.

How do I insert boot media in selected boot device and press a key?

Fixing “Reboot and select proper Boot Device” on Windows

  1. Restart your computer.
  2. Press the necessary key to open BIOS menu. This key depends on your computer manufacturer and computer model.
  3. Go to the Boot tab.
  4. Change the boot order and list your computer’s HDD first.
  5. Save the settings.
  6. Restart your computer.

How can I make my device bootable?

To create a bootable USB flash drive

  1. Insert a USB flash drive into a running computer.
  2. Open a Command Prompt window as an administrator.
  3. Type diskpart .
  4. In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk , and then click ENTER.

How do I boot from hard drive from BIOS?

While the display is blank, press the f10 key to enter the BIOS settings menu. The BIOS settings menu is accessible by pressing the f2 or f6 key on some computers. After opening the BIOS, go to the boot settings. Notebook computers: Select Storage > Boot Options.

How do I select boot device in BIOS?

Use the following the steps to configure the boot order on most computers:

  1. Turn on or restart the computer.
  2. While the display is blank, press the f10 key to enter the BIOS settings menu.
  3. After opening the BIOS, go to the boot settings.
  4. Follow the on-screen instructions to change the boot order.

Why is my hard drive not detected in BIOS?

The BIOS will not detect a hard drive if the data cable is faulty. Make sure the SATA cables are in good condition, and you have connected them promptly. Also, inspect the motherboard for bent or misaligned pins. Check your hard drive manufacturer’s documentation for the right type of cables.