What is the function of the chip MAX232?

The MAX232 is an integrated circuit by Maxim Integrated Products that converts signals from a TIA-232 (RS-232) serial port to signals suitable for use in TTL-compatible digital logic circuits. The MAX232 is a dual transmitter / dual receiver that typically is used to convert the RX, TX, CTS, RTS signals.

What is the difference between TTL RS232 and RS232?

The more extreme voltages of an RS-232 signal help to make it less susceptible to noise, interference, and degradation. This means that an RS-232 signal can generally travel longer physical distances than their TTL counterparts, while still providing a reliable data transmission.

What does MAX232 require?

MAX232 IC is widely used for serial communication among Microcontrollers & PC. The main function of this integrated circuit is to change the logic levels of TTL/CMOS to RS232 throughout the serial communication process.

How many pins are there in IC MAX232?

16 pins
Max232 has 16 pins. It requires four external capacitors for its proper configuration. Capacitors can range between 8 uf to 10 uf and are of up to 16 volts. Pin names With functions are listed below.

What is a TTL converter?

The USB TTL Serial cables are a range of USB to serial converter cables which provide connectivity between USB and serial UART interfaces. A range of cables are available offering connectivity at 5V, 3.3V or user specified signal levels with various connector interfaces.

Is RS-232 same as TTL?

The minimum and maximum voltages of a true RS232 signals are +/- 12/13V., while TTL signals are 0 to 3,3V/5V. The differences between a TTL RS232 (also called RS232-C) and a True RS232 interface is only related to the signal level to GND (Ground) and not with the current to power the scanner.

What are TTL voltage levels?

A TTL input signal is defined as “low” when between 0 V and 0.8 V with respect to the ground terminal, and “high” when between 2 V and VCC (5 V), and if a voltage signal ranging between 0.8 V and 2.0 V is sent into the input of a TTL gate, there is no certain response from the gate and therefore it is considered ” …

Is RS-232 TTL compatible?

Although the RS232 standard defines RS232 to be a True RS232 interface, and TTL is actually not compliant with the RS232 standard, in practice the majority of the RS232 serial ports we connect scanners to are TTL ports. See this document for more information on the differences between TTL and True RS232.