How do I reset my USW Pro 24?

This button serves two functions for the UniFi Switch:

  1. Restart Press and release the Reset button quickly.
  2. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

How do I reset my Ubiquiti controller?

UniFi Controller Reset

  1. Log in to the UniFi Controller. In the Devices page, click on the UAP you wish to reset.
  2. Select the Configuration tab, and click Manage Device to expand.
  3. Click the Forget button. This will erase all configuration and history for that device, effectively resetting it.

How do I factory reset my Ubiquiti?

Reset The Reset button serves two functions for the UniFi AP: • Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

How do I reset my ubiquiti Gateway?

Resets to factory defaults. The UniFi Gateway should be powered on. Press and hold the Reset button for about 10 seconds until the right LED on the WAN 2 / LAN 2 port starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Gateway will automatically reboot.

How do I reset my Unifi POE switch?

Resetting an Unifi Switch

  1. Power off the device. Just unplug the power cable.
  2. Forget the device in the controller.
  3. Unplug all network cables.
  4. Plug power back in.
  5. Wait until the led turns dark blue.
  6. Press the reset button for 5 seconds.
  7. Adopt the device in the controller.

How do I factory reset my Ubiquiti AP Pro?

Reset This button serves two functions for the UniFi AP-PRO: • Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more then five seconds.

How do I reboot my access point?

Resetting the access point using the Reset button Press and hold the Reset button of your access point for 30 seconds. Once the access point is reset, perform a powercycle. Unplug the access point’s power cable and wait for 30 seconds then plug it back in.

What is the default username and password for Ubiquiti UniFi?

As long as the UniFi Access Point has not been previously setup or adopted by the software, and only if you are attempting to connect via SSH, then always use the default username and password of ubnt / ubnt.

What is Ubiquiti default username and password?

Note: The default username is ubnt and the default password is ubnt.

How do you reset a network switch?

The easiest way to reset the switch to its factory default settings is to look for its reset button located on the front panel, then press and hold for more than 10 seconds. You can also do it through the web interface of the switch.