What is 100XF steel?

Strenx®/Domex® 100XF steel is a thermostatically rolled sheet, 100% iron ore-based product with a minimum yield strength of 100ksi. Strenx/Domex 100XF is ideal in applications where its high strength and excellent cold forming characteristics can reduce overall production costs.

What is ex ten steel?

EX-TEN 50® or ASTM A572(50) are available at a strength level of 50 KSI minimum. Provides high strength, good workability and weldability at a comparatively moderate price. Atmospheric corrosion resistance is the same as that of plain carbon steel. Conforms to ASTM A572, SAE J1442 Grade 050X.

What is XF steel?

Strenx® 100 XF is a thermomechanically rolled steel, made for cold forming, with a minimum yield strength of 100 ksi (100,000 psi). Strenx® 100 XF is produced by SSAB the producers of Docol® Tube R8.

What Strenx 100?

Strenx® 100 is a structural steel with a minimum yield strength of 100 ksi. It meets the requirements of ASTM A514 Grade S. Typical applications include demanding load-bearing structures. Thickness measurements in inches can be found in the data sheet.

What is domex 100XF?

Strenx®/Domex® 100XF is a thermostatically rolled sheet, 100% iron ore-based product with a minimum yield strength of 100ksi. Strenx/Domex 100XF is ideal in applications where its high strength and excellent cold forming characteristics can reduce overall production costs.

What is Domex steel?

Domex/Strenx is the brand name of hot-rolled sheet steel from SSAB. This high-strength steel is a low-alloy, cold-formed steel intended for use in the automotive and engineering industries.

What is Strenx steel?

Strenx® steel is the world’s widest range of high yield strength steel, both in terms of strength and dimensional range. Yield strengths range from 600 MPa to 1300 MPa. The most common grades and dimensions of Strenx® can be delivered to you directly from the mill or from a local stock.

What Strenx 700?

Strenx® 700 E/F is a structural steel with a minimum yield strength of 650-700 MPa depending on thickness. Strenx® 700 E/F meets the requirements of EN 10 025-6 for the S690 grade and thicknesses. Typical applications include demanding load-bearing structures.

Is Hardox brittle?

With higher grades, the brittleness factor increases along with hardness. This means that using Hardox as wear plates is a good option.

Which steel is best for welding?

Some of the best metals for welding include: Low Carbon Mild Steel. Aluminum. Stainless Steel.