How do I change the settings on my digital thermometer?

Please follow the directions below: Step 1: Make sure the thermometer is off. Step 2: Press and hold the power button, and after about 5-7 seconds, the display screen will come back in turn: “℃/SET, ℉/SET”. Step 3: Release the power button as soon as the desired temperature unit appears on the display screen.

How do you use a sensor thermometer?

Using the NCIT:

  1. Hold the NCIT sensing area perpendicular to the forehead and instruct the person to remain stationary during measurement(s). ( See Figure 1)
  2. The distance between the NCIT and forehead is specific to each NCIT.
  3. Do not touch the sensing area of the NCIT and keep the sensor clean and dry.

How do I know if my thermometer is reading correctly?

To test your thermometer:

  1. Fill a tall glass with ice and add cold water.
  2. Place and hold the thermometer in the ice water for 30 seconds without touching the sides or bottom of the glass.
  3. If the thermometer reads 32°F, it is reading correctly and can be used.

How do you reset a thermometer gun?

To reset the unit, remove the batteries, wait 2 minutes and then re-install the batteries.

How do you change an infrared thermometer to Celsius?

How do I change units from °F to °C? (Non-Contact)

  1. Firstly ensure the thermometer is turned on, you can do this by pressing the trigger (power button).
  2. Press and hold the ‘Set’ button until you see the screen flash ‘F1’ then ‘Unit’
  3. In the top right corner, you will see either °F or °C flashing.

How do you change an infrared thermometer from Celsius to Fahrenheit Sejoy?

How To switch between Celsius to Fahrenheit using the SEJOY Infrared Thermometer

  1. Ensure the thermometer is off and then press and hold the start button for about three seconds.
  2. When you have reached the unit changing mode release the start button.
  3. Use the power button to change the measurement unit.