How do I connect my ribbon cable to my IDC connector?

Insert the cable into the IDC connector between the body of the connector and the plastic clip. Line up the end of the ribbon cable with the body of the connector so that it does not stick out past the body of the connector.

What is a ribbon cable connector called?

ZIF connectors are used to secure delicate ribbon cables, such as FFC (flat flex cables) or FPC (flexible printed circuit) cables. As the name implies, no force is needed to plug in or remove the cable.

What is IDC ribbon cable?

“An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the …

How do I identify a ribbon cable connector?

Generally, ribbon cables will have one edge marked in a contrasting color to the remainder of the cable, with the color of the edge mark in some instances corresponding to the pitch or center spacing of the cable, for instance a 0.050” spacing cable typically uses a red edge mark.

How do you connect a ribbon cable to a connector?

Slide the new ribbon cable into the connector or attach the connector itself.

  1. If you’re attaching a connector, you should hear the connector click into the clip.
  2. If you slide the ribbon cable into the connector, just line the end of the ribbon up with the bottom of the connector and slide it back into the clip.

Are ribbon cables still used?

These types are used for many types of equipment, in particular for interconnections within an enclosure. For personal computers, this size is used today in floppy-disk-drive cables and older or custom Parallel ATA cables.

What is IDC type?

Types of IDC connector D-type, GPIB, and very many others, but IDC connectors are probably most widely used with the header pin connectors for PCBs. These connectors typically have two rows of pins and can be used for large numbers of connections.

What are the different types of ribbon cables?

Most ribbon cables are color coded for pin one usually red in color. The cable types are Flat cable, Flat Jacket, Ground Plane, Round Jacket, Split Conductor, Flat Twin Axial, and Flat Twisted Pair with the number of conductors ranging from 2 to 154 and pitch ranging from 0.017” (0.43mm) to 0.394” (10.00mm).

When connecting a ribbon cable to a connector How do you know which direction to plug it in?

When connecting a ribbon cable to a connector, how do you know which direction to plug it in?

  1. A. The red line in the cable goes to the highest pin number.
  2. The colored line in the cable goes to pin #1.
  3. It does not matter.
  4. The blue or red line in the cable goes away from the power connector.
  5. E. None of the above.