What does C mean on a dimmer switch?

Dimmers look slightly different to standard switches being much more chunky. They usually come supplied with a common(C), Line out(L1) and Line out(L2) terminals similarly to a two way switch.

What does CL mean for dimmers?

To work around this, Lutron has come up with dimmers called C.L dimmers that work with both CFL and LED bulbs that are dimmable. The “C” in C.L stands for CFL and the “L” stands for LED.

How do CL dimmers work?

A CL dimmer uses resistors to alter the power output and you will be able to use your bulb of choice, even if that’s an LED or fluorescent light. You do need to make sure the lights themselves are dimmable. If you attempt to use an incandescent dimmer with these lights, it will either not work at all or malfunction.

Are dimmer switches always 2 way?

1-Way, 2-Way and multi way circuits Your intelligent dimmer switch is suitable for 1-way or 2- way lighting circuits. It has a push on/push off action to switch and a rotary action to dim. There are 3 screw terminals per module. In 1-way lighting circuits each light is controlled by one switch.

What does L1 L2 and COM mean?

The single direction plane switch has two L1 terminals, the terminal to which the neutral cable is connected – the blue cable (traditional black, before changing). COM or Common is the terminal to which the live core cable is connected – this is the brown cable (red era).

How do I reset my Lutron dimmer?

How do I factory reset my Lutron Caseta dimmer? Rapidly tap the top “on” button three times and on the third tap hold until the lights connected to the switch begin to dim up and down, immediately tap the top “on” button three times rapidly. The connected lights will then alternate dim and bright slowly.

Why don’t my LED lights dim all the way?

100% with incandescent) LED Bulbs may not shut off at lowest dim setting: this is caused by the dimmer thinking the bulb is completely off due to the low amount of wattage an LED consumes.

Which of the following would be a reason to adjust the low end trim of a dimmer?

Adjusting the low-end trim raises the minimum dimming level which will reduce the chance of flickering and drop-out.

What is a cl switch?

The CL series from C&K are single pole power rocker switches, perfect for power outlet strips, HVAC units and floor care products. C&K’s CL switches are resilient, feature positive detent, snap-in mounting and are available with optional illumination.

Can you put a dimmer switch on a light with 2 switches?

With a standard single-pole dimmer, a single switch controls the light. With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another.

What is a Lutron dimmer switch?

These Lutron dimmers are designed to replace or match your traditional style switches. Save energy and extend bulb life with the Ariadni’s easy-to-use toggle switch and small slide dimmer. Designed with a shallow 1-inch deep back cover for easy installation, Ariadni works with your existing traditional multi-gang wallplates.

What are the benefits of Ariadni?

Save energy and extend bulb life with the Ariadni’s easy-to-use toggle switch and small slide dimmer. Designed with a shallow 1-inch deep back cover for easy installation, Ariadni works with your existing traditional multi-gang wallplates. Have questions or need help?

Does Ariadni work with my existing multi-gang wallplates?

Designed with a shallow 1-inch deep back cover for easy installation, Ariadni works with your existing traditional multi-gang wallplates. Have questions or need help? Please contact our Customer Service or Technical Support teams for assistance.