How do I set my IP configuration?

To enable DHCP or change other TCP/IP settings

  1. Select Start, then type settings. Select Settings > Network & internet.
  2. Do one of the following:
  3. Next to IP assignment, select Edit.
  4. Under Edit network IP settings or Edit IP settings, select Automatic (DHCP) or Manual.
  5. When you’re done, select Save.

Where is Linux IP config file?

To store IP addresses and other related settings, Linux uses a separate configuration file for each network interface. All these Configuration files are stored in the /etc/sysconfig/network-scripts directory.

How do I determine my IP address in Linux?

The following commands will get you the private IP address of your interfaces:

  1. ifconfig -a.
  2. ip addr (ip a)
  3. hostname -I | awk ‘{print $1}’
  4. ip route get 1.2.
  5. (Fedora) Wifi-Settings→ click the setting icon next to the Wifi name that you are connected to → Ipv4 and Ipv6 both can be seen.
  6. nmcli -p device show.

How do I fix my IP configuration?

Right-click your wireless network and choose Properties from the menu. Select Internet Protocol Version 4 (TCP/IPv4) and click the Properties button. Select the Use the following IP address option and enter the IP address, Subnet mask, and Default gateway (you might have to enter different data).

How do I set an automatic IP address in Linux?

Configure Static IP Address in RHEL/CentOS/Fedora: If your interface is named “ eth1″ then the file that you will need to edit is “ifcfg-eth1” . Note: Make sure to open the file corresponding to your network interface. You can find your network interface name with ifconfig -a command.

What is my IP from command-line?

From the desktop, navigate through; Start > Run> type “cmd.exe”. A command prompt window will appear. At the prompt, type “ipconfig /all”. All IP information for all network adapters in use by Windows will be displayed.

How do you add an IP address?

Open Network (and Dial-up) Connections. Click Properties. Click Internet Protocol (TCP/IP) then click Properties. Click Advanced. Type in the new IP address then click Add.