What temperature can you apply TWP Stain?

50-85°F.
TWP is a penetrating system and is not designed to build a film. Only apply to properly prepared clean, dry and absorbent bare wood. TWP should dry uniformly flat with no glossy areas. Only apply when the temperature is 50-85°F.

How long does TWP Stain need to dry before rain?

It should not rain 12 hours after applying TWP. The stain may be able to take some rain earlier but it depends on wood porosity.

Does TWP Stain require two coats?

If one coat soaks in fairly quickly a second coat may be applied. A second “wet on wet” coat should be applied within 30 minutes of the first coat. Be cautions of over applying TWP Stain. If excess puddles of wet stain remain after a reasonable amount of time and or not being absorbed do not allow the stain to dry.

How long does it take for TWP deck stain to dry?

24-72 hours
DRY TIME: 24-72 hours depending on drying conditions. Drying conditions will vary greatly depending on applied film thickness and weather conditions. THINNING AND CLEANUP: No thinning required of TWP 100.

How long is Twp stain good for?

Most TWP stained surfaces will last 2-3 years before a recoat is needed.

What if it rains the day after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you’ve stained the wood, the stain will peel and flake off.

Can you stain a deck if it rains the next day?

It is best to never stain any exterior wood when inclement weather is forecasted, especially rain. Most deck stain brands will warn against the application of their product within 12-24 hours of rain being forecast.

How long should I wait to do a second coat of stain on deck?

If a second coat is required, wait 4 hours between applications. Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.

How many coats of stain should you put on a deck?

two coats
Whatever type of stain you use, apply two coats to ensure there are no missed spots and to get a more uniform finish.

Should you shake Twp?

If the TWP stain has sat around a while, it is recommended to take the stain to a paint store and have them shake the cans up before using them. If you used TWP stain and have some leftover, the extra will last 1-2 years as long as the lid is completely resealed.