How do I add sounds to QLab?

Look in the Settings tab of the inspector, and you’ll see two checkboxes. Check the box marked Start next cue when target reaches the end of the current slice. Finally, create another Audio or Video cue directly after the Devamp cue. Now, run the Audio or Video cue, and notice when it reaches the looping slice.

Can QLab send MIDI?

MIDI Voice Message (“Musical MIDI”) QLab can send the following types of MIDI Voice commands: Note On, Note Off, Program Change, Control Change, Key Pressure (Aftertouch), Channel Pressure, and Pitch Bend Change.

How do I send QLab timecode?

To do this, select the cue list in the sidebar, and navigate to the Timecode tab in the inspector. Check the box labeled Trigger cues in this list from incoming timecode, and then choose the mode, sync source, sync input channel (if applicable), and SMPTE format appropriate for your system.

Is there a free version of QLab?

QLab 4 is a free program, with additional optional features that can be unlocked by purchasing and installing a license. This chart shows which of the major features are enabled by each type of license.

What file type does QLab use?

We recommend PNG and JPG . We do not recommend using PSD or PDF formats. When a Video cue is selected, eight tabs will appear in the Inspector: Basics.

How do you trigger EOS QLab?

There are 3 main steps we need to take to successfully trigger Eos from QLab via OSC:

  1. Set up a working network connection between both devices.
  2. Configure Eos correctly to receive OSC.
  3. Configure QLab correctly to send OSC to Eos.

How do I get QLab on Windows?

QLab is not available for Windows but there are plenty of alternatives that runs on Windows with similar functionality. The best Windows alternative is Show Cue System. It’s not free, so if you’re looking for a free alternative, you could try VPT or HeavyM.

Does a QLab license expire?

The first time that QLab launches after the rental period is over, the license will simply stop working on its own. You do not need to “stop” or “cancel” a rental. Every dollar that you spend on a rental license can be applied towards the purchase of a standard QLab license.

Is QLab only for Mac?

Overview. QLab 4 is a Mac-only program. It requires macOS 10.10 or higher, and will work on any Mac that can run 10.10.

When was QLab invented?

History. QLab 1.3. 10 was the first version of the software and was released on May 25, 2007. In January 2009, Version 2.0 was released with a complete visual makeover of the interface and new control features.

How do I set up MIDI In QLab?

Preferences button in the upper right of the QLab window. NOTE: Application Preferences will set the default for new workspaces Click the check box (es) for Use MIDI Show Control and/or Use MIDI Controls Set the ID number for Midi Show Control and/or the Listen on Channel for MIDI Voice.

How does QLab work with effects?

The MIDI OUT from the audio interface from to the QLab system is connected to the IN of a lighting console. The OUT from the console is sent to the IN of an Effects processor: This isn’t a complete loss in control, it just makes things more complicated.

How does QLab respond to MSC messages?

QLab will respond globally to MSC messages including GO, STOP, LOAD, RESUME, ALL_OFF, STANDBY +/-, RECEIVE +/- and RESET. In addition, you have the chance to define voice messages to execute a variety of global QLab commands in the same screen as you set up the Device ID.

How do I use QLab as a show controller?

Setting up MIDI Devices. Triggering a cue with a MIDI Voice Message. QLab can function well as a complete Show Controller for a variety of productions from simple to very complex. It achieves this is two main ways; Open Sound Control (OSC) or via the Musical Instrument Digital Interface (MIDI).