What is Acer battery calibration?

Battery Calibration: Battery calibration will help make the charge level and remaining time indicators on your computer more accurate. You can enable this feature in the Checkup menu in Acer Care Center. Note:Battery calibration is not currently supported using a USB Type-C power adapter.

How do I limit my Acer laptop battery to 80?

If your system has Power Management Options, then select the drop-down for Battery Health Manager and select Maximize my battery health. This setting maximizes the battery health by lowering the maximum battery charge level to 80%. Next, press the F10 key to save the changes and exit.

How do I calibrate my Acer laptop battery?

How to Calibrate the Battery using Acer Care Center

  1. Make sure your battery is charged to 100%.
  2. Discharge/drain the battery to 3%* (mine lasted until 10%)
  3. Activate Battery Calibration (“Calibrate Now”) in Acer Care Center with the laptop plugged into AC Power then let it charge.

How do I refresh my laptop battery?

Laptop Battery Refresh Procedure Follow

  1. Connect the AC adapter and charge the battery fully.
  2. Fully discharge the battery (by running the unit) until the power LED goes off.
  3. Connect the AC adapter and charge the battery fully a second time.
  4. Fully discharge the battery until the power LED goes off again.

How do I calibrate my Acer laptop battery Windows 10?

How to recalibrate the battery in your Windows 10 laptop

  1. Hardware and software for this guide. AC power pack: EWEMOSI AC portable power bank ($120 at Amazon)
  2. Change your power plan.
  3. Charge your battery.
  4. Unplug your laptop and let it discharge.
  5. Charge your battery again.
  6. Reset your power plan.

How do you reset an Acer Aspire battery?

Unplug the AC power adapter. Press and hold the Power button down for 15 seconds. This will perform a software battery reset that may resolve the issue. If your system has a battery pinhole reset on the bottom, insert a small paperclip in the battery reset pinhole and hold the button down for 5 seconds.