How do I reset my explorer 8300HD?

How to Reset an Explorer 8300HD Cable Box

  1. Press and hold the “Volume Up” and “Volume Down” buttons on the front of the unit.
  2. Press the “Info” button.
  3. Release the buttons when the HD8300 begins to reboot.

How do I reset my Scientific Atlanta cable box?

Turn off the cable box with your power button if possible. Disconnect the power cable from the back of the device. Wait 30-60 seconds and then reconnect the power cable. Once the box finishes restarting, you will have to press the power button to use the device.

How do I connect my Scientific Atlanta cable box?

Plug the antenna’s coaxial cable connector into the “Coax In” or “Antenna In” port on the digital television converter box. Plug one end of a yellow composite cable into the converter box’s “Video Out” port. Plug the other end of the cable into the “Video” port on the back of the projector.

Why my cable box is not working?

Try plugging the TV box into a different wall outlet. Locate your home breaker box and check to see if the breaker for the wall outlet has tripped. If it has, turn the breaker to the “on” position to restore power to that outlet, then try to power on your TV box.

How do I get my TV back to cable?

Reboot the TV and the Cable Box To do this, either use your remote or the power button on the box itself. Then, wait for a few minutes to turn it back on. After that, reboot your TV. Turn off your TV and wait for a few minutes to turn it back on as well.

How do I get my cable box to work again?

Carefully unplug the Set-Top Box power cord from the electrical outlet or power strip if you’re using one. Wait 30 seconds while the Set-Top Box completely shuts off. Plug the power cord back in. The Set-Top Box will automatically reboot – this may take a few minutes.

How do you know when you need a new cable box?

How Can I Tell If I Have a Bad Cable Box?

  1. Ensure your box and television are receiving power.
  2. Test your television to make sure a lack of picture isn’t because the television isn’t working.
  3. Check all connections between the television and cable box.
  4. Tune in the television to the correct channel if using a coax line.

How long does it take for cable box to reset?

In most cases, your TV Box should reset in 15 minutes. In some cases, the program guide or other services may take 45 minutes before they are available.