How is desiccant dehumidifier calculated?

2. Calculate the SCFM for one air change (volume / 60). 3. Calculate the dehumidification capacity required (SCFM x ACH)….You need to provide dehumidification capacity for three air changes per hour (ACH).

  1. Volume = 100 x 50 x 50 = 250,000 cu.
  2. SCFM = 250,000 / 60 = 4,167 SCFM.

How do you calculate dehumidification capacity?

To determine the number of dehumidifiers that are required, divide the number of pints required to dry the space and then divide by your dehumidifier capacity (if you do not the AHAM rating of your dehumidifier, check the manufacturers website). The result of this calculation represents the number of machines needed.

How do you build a desiccant dehumidifier?

Here’s how to make a DIY silica gel dehumidifier.

  1. Collect a jar with a lid, a screwdriver, and silica gel.
  2. Use the screwdriver to make holes in the lid of the jar.
  3. Fill the jar with silica gel and screw back on the lid.
  4. Replace the silica gel every few weeks for the best results.

How do you make a homemade dehumidifier?

Rock Salt Dehumidifier Rock salt dries out small rooms, making it perfect for closets or basements. Place a decorative piece of rock salt in a room as a natural dehumidifier. If your salt is granular, pour it into a dish or bag. Place this onto or inside another container.

How do you measure the efficiency of a dehumidifier?

The energy efficiency of dehumidifiers is measured by its energy factor, in liters of water removed per kilowatt-hour (kWh) of energy consumed or L/kWh. In general, a higher energy factor means a more efficient dehumidifier.

What is dehumidification capacity?

Capacity of a dehumidifier is defined by the amount of water it removes per hour or per day. The capacity is also given for a full day.

How big of a dehumidifier do I need for 1000 square feet?

Use a 30-pint dehumidifier (or a unit between 24- and 39-pint capacity) in the following conditions: Damp rooms of 500-1,500 square feet. Very damp rooms of 500-1,000 square feet.

How big of a dehumidifier do I need for 1200 square feet?

AHAM Dehumidifier Capacity Table

Humidity Levels: 300 sq ft space 1,200 sq ft space
80-100% Humidity (Seepage on walls, mold possible) 45 Pint (Old Standard) 30 Pint (New Standard) 90 Pint (Old Standard) 60 Pint (New Standard)