Can you swap a Campagnolo freehub to Shimano?

The basic difference and reason why we need to change freehub bodies between groupsets is that the splines on the body are a different pattern, so a Campagnolo cassette will not slide onto a Shimano/SRAM body. Similarly Campagnolo will not fit on the other.

How do you remove the end cap on a fulcrum?

The right side (on the opposite side of the adjustment ring nut) remains fixed, the left side end cap rotates counter-clockwise to loosen the end cap. Loosen the axle end cap (adjustment ring nut side). While removing the end cap, make sure you do not lose the spacer.

Can I put a Shimano cassette on a Campagnolo hub?

If you have a Campagnolo cassette, you require a Campagnolo freehub, they are not compatible with Shimano or Sram.

How do you remove the freehub on a Campagnolo?

Campagnolo® 1 Remove set screw from side of drive side locknut. 2 Hold non-drive side cone with cone wrench. Loosen and remove drive side locknut. 3 Pull freehub to remove. Use care not to loose small parts. Note orientation of pawls as you remove freehub.

How do you replace a Campagnolo Centaur hub?

Step 1: Remove the freehub body. For new Campagnolo Centaur, Chorus and Record hubs, immobilise the axle from the left side using a 5mm Allen key. Now, with a 17mm spanner, turn the right side locknut clockwise and remove it. The freehub assembly should come away with a firm tug, leaving the axle assembly in the hub.

Are Campagnolo hubs compatible with Shimano?

Spare freehub body for Campagnolo and Fulcrum hubs/ wheels to enable Shimano compatability. Fits Protons, Eurus, Shamal, Zonda, Hyperon, Bora, Campagnolo HPW type hubs, Racing Speed, racing Zero, Racing 1 and Racing 3 wheels.

How do I remove the freehub from the rear axle?

Wrap the compression tool around the pawls with the hook facing outwards then carefully slide the freehub body back onto the axle, partially inserting the pawls into the ring drive but allowing enough space to remove the tool. Unhook it and pull it down and away, while gently pulling it apart. The freehub should drop into place.