What are the levels of cut-resistant gloves?

The levels indicate how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.

  • A1: 200 – 499 grams.
  • A2: 500 – 999 grams.
  • A3: 1000 – 1499 grams.
  • A4: 1500 – 2199 grams.
  • A5: 2200 – 2999 grams.
  • A6: 3000 – 3999 grams.
  • A7: 4000 – 4999 grams.
  • A8: 5000 – 5999 grams.

What does cut level 5 mean on gloves?

What does level 5 cut resistant mean? It refers to a glove that has passed the ANSI test for level 5 protection, which requires 2,200 to 2,999 grams to cut the glove’s material.

What are cut-resistant gloves good for?

Cut resistant gloves refer to gloves that can withstand cuts from sharp objects. This may include blades, glass, knives, and tools in construction or automotive work. They help to prevent cuts or abrasions after using tools and, (when properly used) reduce the risk of injury in workplace settings.

What type of glove does not help protect against cuts?

Leather gloves also protect against sparks, moderate heat, blows, chips and rough objects. Fabric gloves (like cotton) protect against dirt, slivers, chafing and abrasions. They do not provide sufficient protection for use with rough, sharp or heavy materials.

What is cut level 1?

Level 1 Cut Resistance is a low level of protection against sharp objects and cutting hazards. As such, Safety Gloves that have Cut Resistance Level 1 should not be used in areas where coming into contact with sharp objects is a likelihood.

What is Level 9 cut resistance?

A8 – Protective gloves, Level 8: withstands 5000 g to 5999 g of cutting load. A9 – Protective gloves, Level 9: withstands 6000 g or more of cutting load.

Are cut resistant gloves cut-proof?

How Do Cut Resistant Gloves Work and What are the Benefits? Cut-resistant gloves are designed to be just that – cut resistant. No glove will ever be cut-proof, however, they are still very beneficial to wear considering 70% of workers who had hand or finger injuries were not wearing gloves.

Does OSHA cut-resistant gloves?

Occupational Safety and Health Administration (OSHA) Standards. Although there are no OSHA standards that specifically address cut-resistant gloves, 29 Code of Federal Regulations (CFR) 1910.132 and 1910.138 do apply to hand protection.

Do nitrile gloves protect against cuts and burns?

Gloves made of rubber (latex, nitrile, or butyl), plastic, or synthetic rubber-like material such as neoprene protect workers from burns, irritation, and dermatitis caused by contact with oils, greases, solvents, and other chemicals.

How do I know my gloves cut level?

Cut resistance is measured by taking a sample of the glove and cutting it in continuous cycles until the material has been completely severed. The amount of cycles that is required to cut the material indicates its level of cut resistance.