How do I program a One For All Big Easy universal remote?

How does it work? The process is as simple as pointing the original remote towards the One For All remote, selecting a key on the One For All remote and pressing the key on the original. Repeat for each key you want to learn and from then on the One For All will do exactly what your original remote does!

How do you code search One For All remote?

Searching for Codes One-For-All URC10820 Universal Remote

  1. Turn on your TV and on the remote control, press TV once.
  2. Press and hold SET until the LED (red light) blinks twice, then release SET.
  3. Enter 9 9 1.
  4. Select a test function from the list below or use the default test function (POWER) and skip step 4.

What is magic button on One For All remote?

This sets Volume to work for one device in all modes. For example, the TV volume will work in the cable and VCR modes. PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE. PRESS 9 – 9 – 3.

How do you program URC remote?

Additional Programming Information

  1. Turn on the TV.
  2. Press and hold SETUP until the LED on the remote blinks twice.
  3. Press the POWER key; LED should remain on.
  4. Press and hold the digit key associated with your TV brand: 1 – Insignia / Dynex. 2 – LG / Zenith.
  5. Let go of the key when the TV turns off. Setup is complete.

Where is the URC number on a One For All remote?

URC numbers are located on the back of the One For All remote or in the owner’s manual.

How do you use a One For All remote control?

How do I reset my One For All remote?

All replacement remotes: How do I perform a factory reset on my Replacement Remote?

  1. Hold down the GREEN + YELLOW key, until the LED blinks twice.
  2. Enter the code 981.
  3. The LED blinks now four times and everything is deleted from your remote control.