What radius neck did SRV use?

What radius neck did SRV use?

12″
Specs

What radius was SRV guitar?

012″ at the 7th and 9th frets, and leveled out through the remainder of the fingerboard. The fingerboard radius when new would have been 7.25 inches as were all pre CBS curved fingerboard Fenders but SRV’s guitar ended up after many refrets and sanding of the fingerboard as 10″ and used Dunlop 6100 fretwire.

What kind of neck did SRV use?

Stevie decided to replace the neck with the mid-’50s-style maple neck given to him by Billy Gibbons. He kept the tremolo arm, pickups and frets in their original condition, but added his signature and initials on the neck plate and pickguard.

Which Strat has a 12 radius?

Deluxe Series Stratocaster® Neck, 12″ Radius, 22 Narrow Tall Frets, Pau Ferro Fingerboard.

Did SRV play a pau ferro?

With its infamous “SRV” pickguard, gold-plated hardware and upside-down tremolo system, the Stevie Ray Vaughan signature Stratocaster has its own eye-catching style. But there is one important feature of this legendary guitar that sometimes gets overlooked—the pau ferro fingerboard.

What is the radius of the neck of a Fender Stratocaster?

9.5 and 10 inch radius has been the new standard radius for Fender Stratocaster’s. Actually 9.5 has been there go-to radius for production model guitars for probably the last 30 years, with a 10 inch becoming more standardized within the last 10 years or so.

What is the fretboard radius on a Les Paul?

The 12″ radius of a Gibson Les Paul Traditional.

What fret size did SRV use?

The guitar featured frets that measured 0.110″ wide by 0.055″ when new, similar to Dunlop 6100 fretwire. String height was measured to be 5/64″ on the high E string and 7/64″ on the low E string. Each string had three full winds for the best angle at the bone nut.