What are the three types of sprinkler heads?

There are three basic sprinkler head types– Spray Irrigation Heads and Spray Rotary Sprinkler Heads, Bubbler Irrigation Heads, and Drip or Soaker Systems. Each different sprinkler head will water your plants in the particular way they like.

What type of sprinkler head do I need?

Sprinkler heads commonly operate at a residential water pressure of 30 to 50 pounds per square inch (PSI). Sprayers and rotary heads work best the water pressure is less than 40 PSI. A rotary sprinkler head is most effective on lawns greater than 30 square feet.

How much do sprinkler heads cost?

On average, sprinkler head replacement costs between $65 and $90 to hire a professional, or $2 to $12 per head if you replace them yourself. The cost to install additional sprinkler heads is between $94 and $103 or about twice as much as replacing or relocating one.

What do you call a sprinkler head?

Escutcheons, also known as trim plates, sleeves, design rings or extenders, are a very important and necessary part of any fire sprinkler system. Sprinkler heads in ceilings or walls must have proper fitting escutcheons according to NFPA 13, 25 and 101 code.

What are the 2 types of sprinkler heads?

There are 4 common varieties of fire sprinkler heads: pendent, upright, sidewall & concealed – each with their own particular use.

What do the different color sprinkler heads mean?

The liquid in the sprinkler head comes in a variety of colors, which indicates the temperature required to activate the head: Orange – 135° F. Red – 155° F. Yellow – 174° F.

What is the most efficient sprinkler head?

The MP Rotator is the most efficient sprinkler nozzle available on the market today. This high efficiency rotating nozzle has been defined as a water-saving device, perfect for retrofitting older systems and great for new installations. The MP Rotator was designed with efficiency and sustainability in mind.

How often replace sprinkler heads?

Annual inspections help ensure the system is working correctly, and no rust or water back-up has occurred. Even with regular maintenance, sprinkler heads do not last forever. Fire safety protocol recommends you get sprinkler heads replaced once every five years to prevent fire sprinkler leaks.

Can you add sprinkler head to existing zone?

Adding Irrigation / Sprinkler Risers: You can add new risers to an existing zone in two ways: either along an existing line of PVC pipe or on a new line you branch off of from an old line. The steps below will show how to add risers to an existing line. Cut Pipe: Locate the spot where you want to add a sprinkler head.

What is the function of a sprinkler head?

A fire sprinkler or sprinkler head is the component of a fire sprinkler system that discharges water when the effects of a fire have been detected, such as when a predetermined temperature has been exceeded. Fire sprinklers are extensively used worldwide, with over 40 million sprinkler heads fitted each year.

What are the sizes of sprinkler heads?

Pop-up sprinkler heads generally range from 2 to 20 inches with the water reaching between 3 and 15 feet. The pop-up sprinkler head types that reach a height of four inches when activated are great for grassy areas and lawns, where blades are generally around 3 inches.

What are the types of sprinklers?

What are the Different Types of Fire Sprinkler Systems? Wet pipe, dry pipe, pre-action, and deluge are four types of fire sprinkler systems. Each of these systems helps prevent flames from spreading and reduces fire damage.