What is a triple chip saw blade used for?

TCG Grind This saw blade tip geometry is a triple chip grind (TCG) commonly used to cut non-ferrous metals and composite materials such as laminated particleboard, MDF and other panel materials.

What is a TCT triple chip blade?

This blade has triple angle ground teeth and negative rake for use with Mitre Saws and Radial Arm Saws when cutting laminates and aluminium.

Is more teeth on a circular saw blade better?

Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.

What is a FTG blade?

FTG – Flat Top Grind FTG saw blades are designed to rip wood with the grain. They are optimized to remove chips of material and sawdust from the teeth quickly and efficiently. The FTG blade makes fast, efficient cuts, and is durable and long-lasting.

Can I use a TCT blade to cut wood?

Carbide-tipped saw blades This type of blade is therefore a great option for cutting hardwood, plywood or chipboard which can all dull steel blades very quickly. Note that this type of blade is not as easy to sharpen as other blades. Tungsten carbide is often abbreviated as TC or TCT (tungsten carbide tips).

What does TCT stand for in saw blades?

Tungsten Carbide Tips
Tungsten Carbide Tips. TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal. All of this is possible thanks to the teeth on the saw blades, and the tungsten carbide tips, or TCT.

Which saw blade makes the smoothest cut?

With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.

What do you call the hole in the middle of a saw blade?

The center hole is technically considered the arbor hole. It’s essential to understand the connection between the bore and the shaft. You’ll need to know the shaft’s diameter when you’re selecting a blade, as a precise fit between the two will ensure steady spin and cut efficiency.