What are the parts of a condenser?

most of the condensers are made up of 4 basic parts. A cabin which is a housing for other parts, coils which can be made by copper or aluminum, a compressor which is for increasing pressure and a fan whose job is flowing air into coils.

Where is the suction accumulator located?

The accumulator is installed in the suction line, close to the compressor. It usually is a vertical container with top connections. An internal U-tube reaching down near the bottom is installed on the compressor outlet connection so that the tube inlet is near the top of the container.

What are the six 6 types of refrigerating machine?

The 6 Main Components of a Refrigeration System

  • Thermostatic Expansion Valve (TXV) Before the evaporator, this is located at the end of the liquid line.
  • Evaporator.
  • Capacity Control System.
  • Compressor.
  • Condenser.
  • Receiver.

What are the parts of an AC compressor?

Understanding the Main Components of Your Air Conditioner

  • Compressor. Located in the outdoor portion of your unit, the compressor is basically the motor to your air conditioning unit.
  • Condenser.
  • Expansion valve.
  • Evaporator coil.
  • Fan.

What is evaporator in HVAC?

An evaporator coil is the part of an air conditioner or heat pump that absorbs the heat from the air in your house. It is located inside the air handler or attached to the furnace.

What is slugging a compressor?

Slugging is a short-term return of a mass of liquid, consisting of refrigerant or oil, or as a mixture of both. The slug enters the cylinders of the compressor instead of super-heated vapor. Slugging almost always occurs on startup, but a very rapid change in system operating conditions can also cause slugging.

What is the most important part of a refrigerator?

Compressor is the most important component, which is usually called the main engine in refrigeration system. The refrigerant steam is increased from low pressure to high pressure and the continuous flow and transportation of the steam is achieved by the work of the compressor.