What is the typical crystal frequency?

While the frequency of 4.332 MHz is the most commonly used crystal resonator, its multiples (2×4.332 MHz = 8.664 MHz or 4×4.332 MHz = 17.328 MHz) have been used also.

What will be the maximum baud rate for the crystal frequency of 11.0592 KHz?

Intel 8051 Microcontroller uses the odd value of 11.0592 MHz crystal as it yields a cycle frequency of 921.6 KHz which can be divided evenly by the standard communication baud rates of 19200,9600,4800,2400,1200 and 300 hertz.

Why 11.0592 MHz quartz crystal is used?

This 11.0592 MHz Quartz Crystal is used for precise timing and frequency generation. It is great for devices such as clocks, radios, and computers. This 11.0592 MHz Quartz Crystal provides a stable clock signal for integrated circuits and stabilizes the frequencies for radio transmitters and receivers.

What will be the machine cycle if crystal frequency is 11.0592 MHz?

1.085 us
The machine cycle of a system of 11.0592 MHz is 1.085 us.

How do you choose crystal load capacitance?

The capacitors should have twice value of loading capacitance minus stray capacitance (trace and pin capacitance). I.e. if loading capacitance is 20pF, stray capacitance per each uC pin 2.5pF, C44 and C45 on your circuit should be 20*2-2.5=37.5pF. So 33 or 39pF should work.

How accurate are crystal oscillators?

Crystal−based oscillators may well offer a center frequency accuracy of 150 ppm or better. Even if an oscillator exhibits perfect performance in terms of average output frequency, there may still be considerable variation over a smaller number of cycles, even from one cycle to the next.

What is the time taken by one machine cycle if crystal frequency is 20MHz?

200*100 times
7. What is the time taken by one machine cycle if crystal frequency is 20MHz? Explanation: It will be executed 200*100 times.