What happens when you strengthen lofts on irons?

The short answer: When you hear a reference to stronger lofts or strengthening lofts, it means reducing the loft angle of your club or clubs in order to add distance and/or lower trajectory. The loft of golf clubs is expressed in degrees (18 degrees, 27 degrees, 38 degrees, whatever the case may be).

How much does 1 degree of loft affect iron distance?

Given that you’re at your maximum clubhead speed, just 1-degree change in the loft angle of a golf driver can affect your driving distance by 2-4 yards. As for irons, the difference in distance between 8-iron (37-39 degrees) and 9-iron (41-43 degrees) is usually 10-15 yards.

What does strengthening loft mean?

A stronger loft – or strengthening your loft – means that a clubfitters had literally bent the golf club(s) in question to reduce the amount of loft. (Not all golf clubs can be bent in such a way; it’s typically done only in irons and may depend on the type of hosel used.)

Should I strengthen my iron lofts?

Average golfers might need lower or stronger lofts throughout their irons. That’s because they add loft at impact, says Collier, turning a 7-iron into an 8- or 9-iron. That’s a more glancing blow. A fix is to get a clubfitter to bend your iron lofts a degree strong.

Does strengthening loft affect lie angle?

As you change the loft and the face angle, you will also change the lie unless there is a separate setting to alter the lie independently of loft. Loft changes the ball flight vertically and lie changes the ball flight horizontally.

Does strengthening loft increase offset?

Offset isn’t mainly because offset is measured in inches/mm. Weakening lofts will lesson offset while and strengthening lofts will increase offset.

Should I get stronger lofted irons?

A stronger(lower) loft in newer irons will produce a higher ball flight than the weaker(higher) loft in older clubs. At least that is the marketing pitch. The intent is to make it easier to launch the ball higher and in the process easier to hit.

Why do my irons go so low?

One reason amateurs tend to hit irons too low is that they narrow their swing radius, taking the club back by letting the lead arm (left arm for right-handers) bend too much. It doesn’t have to be locked, but it should maintain a fairly straight appearance all the way to the top.

Why can’t I get my irons in the air?

Clubs are designed to get the ball in the air. In order for a golf ball to get airborne, the club head must contact the ball at the low point of the downswing. The ball gets trapped between the club-face and the ground. The ball then spins up the face of the club, and the loft determines just how high the ball goes.

Should I bend my irons upright?

If your club is too upright at impact, then your shots will travel to the left of your target. Conversely, if your club is too flat, then your shots will be heading right. For every degree that your lie angle is either too upright or flat, the ball will initially travel 4 yards off your intended target line.