What is the default BIOS password for HP probook?

There is no default password for any HP BIOS.

How do I bypass BIOS password on HP probook laptop?

Click User Management. Remove all account(s) under ProtectTools Users section then click Save. Go back to Security tab. Click Change Password to remove BIOS Administrator password.

How do I find my HP BIOS password?

HP Notebook PCs – Managing the Administrator Password in UEFI…

  1. Turn on the computer, and then immediately press F10 until the BIOS menu displays.
  2. Under the Security tab, and then use the up and down arrow keys to select Setup BIOS Administrator Password.
  3. Type your BIOS Administrator Password, and then press Enter.

What is HP default BIOS administrator password?

The default administrator or root password for all HP-provided Build Plans is: ChangeMe123! CAUTION: HP strongly recommends changing this password before deploying to any servers. See Set (encrypt) the administrator/root password for details.

How do I reset my HP BIOS Admin password?

Changing the Administrator Password in UEFI BIOS

  1. Turn on the computer, and then immediately press F10 until the BIOS menu displays.
  2. Under the Security tab, and then use the up and down arrow keys to select Setup BIOS Administrator Password.
  3. Type your new BIOS Administrator Password, and then press Enter.

What is the BIOS Admin password?

A BIOS password is authentication information that is sometimes required to log into a computer’s basic input/output system (BIOS) before the machine will boot up. BIOS is the program a computer’s microprocessor uses to control the computer’s initial boot sequence and hardware initialization.

How do I reset my HP BIOS password?

Turn on the computer and immediately press the ESC key to display the Startup Menu, and then press the F10 to enter BIOS Setup. 2. If you have typed your BIOS password incorrectly three times, you’ll be presented with the screen prompting you to press F7 for HP SpareKey Recovery.

How can I break laptop BIOS password?

Turn off the computer and disconnect the power cable from the computer. Locate the password reset jumper (PSWD) on the system board. Remove the jumper plug from the password jumper-pins. Power on without the jumper plug to clear the password.