Can you use a sewer jetter hose on a pressure washer?

The Sewer Jetter Hose can be connected to pressure washer gun or wand with 1/4″ quick connect plug. It can also connect directly to the outlet of the pump or a ball valve with coupler attached (M22 female to 1/4″ female NPT coupler). The 1/4″ jittering hose will receive 1/4′ Laster or Rotating Sewer Nozzle.

How much PSI does a sewer jet need?

Hydro jetting uses a specialized hose and nozzle to shoot water through your pipes at a force of around 1500 psi on average (although that number can rise to 5000 psi), which is one reason you need a skilled plumber to do the job.

Can I turn my pressure washer into a Jetter?

Connect your water line to your power washer like you would normally do. Then use the quick connect coupler that should be included in your sewer jetter kit to your spray wand. At the other end of your jetter hose, use the quick connector to connect the nozzle you would like to use.

What size Jetter hose do I need?

Generally speaking, the larger the pipe you are clearing, the more flow from the pump on your jetter is required. If the majority of your work is 100-150mm, a flow rate between 21-25 lpm is ideal as you can use a small diameter 3/16” hose from a Mini Reel without overworking the pump.

Is Hydro Jetting worth it?

Safe for your pipes: When done by a trained professional, hydro jetting can clear your pipes of debris safely and effectively, which not only helps with water and waste flow, but also increases the longevity of your pipes and cuts down on your water bills, as your system is now more efficient.

Should I hydrojet my sewer line?

If you don’t get an annual hydro jet cleaning, it can still be a good idea to choose hydro-jetting over snaking when you have a clog in the sewer lines. Hydro jet drain cleaning will completely remove the debris, and you’ll experience clogs less frequently.

Can you use a jet wash to clear a drain?

Drain jetting is the most effective method of clearing a persistently blocked drain, and it involves the use of a high pressure jet of water to remove the blockage.

How do you hook up a sewer jetter?

Attach your pressure washer hose to your pressure washer and run this hose to the inside or outside drain you want to clean. Remove your gun/wand and attach the provided ball valve, jumper hose and hose reel. Install the provided jetter hose onto the hose reel and attach the desired nozzle for the job at hand.

What is a jetter hose?

Jetting hose is lightweight, abrasion resistant, slippery and pushable when inside pipe. Jetting nozzles are designed to pull the hose into the line and provide proper cleaning.