Can you buy guard rail?

Our standard highway guardrail is in stock and ready to ship. But if you’re looking for a different but similar option with added benefits, check out our Standard Guardrail.

How much does used guard rail cost?

USED GUARDRAIL Cost of Labor Total
1st Install (now) $50/section $144/section
TOTAL COSTS at 30 years, (no re-install required) Labor Total: $50 Final Cost: $144/section ($11.52/ft)

How much does guardrail cost per foot?

The cost for corten steel guardrail systems is $47 to $50 per linear foot, or approximately 10-15% more than the costs for steel galvanized guardrail systems.

How much does a piece of guardrail weigh?

Posts: 8ft. Used Guardrail Posts weigh about nine pounds per foot and the posts are commonly stacked in two lifts of 25ea “Half-Bundles,” which are then banded together into one 50-piece “Full Bundle” stacks. Eight Foot Used Guardrail Posts usually weigh approximately 73 pounds each.

What is the difference between a guardrail and a handrail?

Defining Guardrails and Handrails OSHA and many building codes use the term “guardrail” to refer to fall protection for raised platforms and stairways, but the industrial safety industry uses the more specific term “handrail,” with “guardrail” used only to refer heavy-duty beams of formed steel.

How high should guard rails be?

(a) A standard guardrail shall consist of top rail, midrail or equivalent protection, and posts, and shall have a vertical height within the range of 42 inches to 45 inches from the upper surface of the top rail to the floor, platform, runway, or ramp level.

How much force can a guard rail take?

Guardrail systems are capable of withstanding, without failure, a force of at least 200 pounds (890 N) applied in a downward or outward direction within 2 inches (5 cm) of the top edge, at any point along the top rail.

What is the purpose of guardrails?

A guardrail is, first and foremost, a safety barrier intended to shield a motorist who has left the roadway. The best case scenario, if a car is careening off the road, would be for that car to come to rest unhindered.

How long are guard rails?

W-Beam Guardrail Physical Length: 13’6” // Industry Build Per panel: 12’6” // Approx. Weight per Panel: 93 pounds. LONG USED GUARDRAIL PANEL: Physical Length: 26′ // Industry Build per Panel: 25′ // Approx.

How long is a guardrail panel?

Physical Length: 13’6”. Industry Build Per panel: 12’6”.

How tall should a guard rail be?

42 inches to 45 inches
(a) A standard guardrail shall consist of top rail, midrail or equivalent protection, and posts, and shall have a vertical height within the range of 42 inches to 45 inches from the upper surface of the top rail to the floor, platform, runway, or ramp level.