What size is a 16mm drill bit?

What size is a 16mm drill bit?

0.6299in
Drill Bit Size (mm) 16.00 Drill Bit Size (Inch) 0.6299in; 16.0mm Drill Bit Size 0.6299in; 16.0mm Drill Bit Size (Decimal) 0.6299 Shank Diameter 1/2in Tool Material High Speed Steel Shank Diameter (Inch) 1/2in; 1/2 Coating Oxide Drill Point Angle 118?

What size is a 1/8 drill bit in MM?

What size is a 10 HSS drill bit?

HSS M35 Cobalt Twist Drill Bits, Pack of 10 (3.2mm, 1/8″)

What number is a 1/8 drill bit?

Drill Bit Size Chart

What number is a 1/16 drill bit?

Downloadable versions:

What size is a 14mm drill bit?

Metric Tap and Drill Bit Size Table

What size is a 5 HSS drill bit?

Additional Information

How do you tell if a drill bit is 3 16?

Check the Shank It’s small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32. Some graduate in 16ths, some graduate in 32nds, some even graduate in 64ths.

What size drill bit is 14mm?

What size is a letter H drill bit?

This chart shows the diameters of letter gauge drills size A (the smallest) to size Z (the largest)….Letter Drill Sizes.

What drill bit is near 11 16?

For shank bits, you’ll work with these sizes: 1/2; 33/64; 17/32; 35/64; 9/16; 37/64; 19/32; 39/64; 5/8; 41/64; 21/32; 43/64; 11/16; 45/64; 23/32; 47/64; 3/4; 49/64; 25/32; 51/64; 13/16; 53/64; 27/32; 55/64; 7/8; 57/64; 29/32; 59/64; 15/16; 61/64; 31/32; 63/64; 1; 1-1/8; 1-1/4; 1-3/8; 1-1/2.

What size is a HSS 6 drill bit?

Drill America 17/64″ x 6″ HSS Aircraft Extension Drill Bit, D/AA/CX617/64