How do you use Blanchon maintenance oil?

The oil itself is supplied ready to use, just shake well before use. The oil should also be stirred regularly before use. In a well ventilated room spread the oil evenly in a fine coat, using a cotton cloth, a microfiber brush or an applicator brush. This should be done along the grain of the wood.

Can you buff hard wax oil?

Buffing the oil like this enables you to achieve a beautiful uniform finish, that deeply impregnates the wood. Failing to buff the coloured hard wax oil at this stage can result in a finish with undesirable excess thickness on the surface.

How long does Fiddes Hard Wax Oil take to dry?

4-6 hours
Apply evenly using Fiddes Floor Oil Brush or a good quality bristle or synthetic brush, following the direction of the grain. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. Apply as first coat. Leave to dry 4-6 hours in warm well ventilated conditions.

Can you apply wax oil with a brush?

Use a brush or roller to evenly apply Treatex Hardwax Oil allowing roughly 30g per m². On worktops and doors etc.

Do you need to sand between coats of hard wax oil?

Sanding is not necessary between coats. However, de-nibbing with a pad may help to reduce any imperfections from the surface between each coat. It is important to avoid the use of wire wool to carry out this task.

Do you need to sand between coats of Hard Wax Oil?

Does hard wax oil darken wood?

The oils penetrate the surface of the wood and create a bond which stops flaking and peeling. We have had customers who have used oils on untreated slate, and clay tiles. However be aware that the oils will darken the surfaces and once applied is very difficult to remove.

Can you sand Hard Wax Oil?

If you want to use any oil on your floor, but especially a wax oil it is recommended to sand the floor with a 150 grit sandpaper or coarser. Then this product will be ideal for you.