Why does my breaker keep tripping on my heat pump?

When your heat pump’s condenser coil is dirty, your unit has to run at a higher capacity to produce the same amount of cooling or heating. This causes the breaker to trip. Regularly maintaining your heat pump can help ward off this issue.

Why does my breaker suddenly keep tripping?

If your circuit breaker keeps tripping, it’s usually a sign of something wrong with the circuit. There could be a short circuit in one of the appliances or somewhere in the wiring. There could be a ground fault causing the breaker to keep tripping. There could be a circuit overload.

What to do if AC breaker keeps tripping?

If the circuit breaker keeps breaking, you might need to have an HVAC technician check the flow of electricity between the fan and your circuit. A running AC unit should switch on in about one second – so anything longer than that could be a sign that you have an issue with your compressor.

How do you reset a heat pump breaker?

Reset the system by turning it off with the thermostat or breaker if your unit has a safety device locking it out. Wait 60 seconds and turn it back on. It may take up to 10 minutes for the outdoor unit to start.

How do you find out what is tripping my electric?

The easiest way to tell is by locating your fuse box and seeing if any of the electric breaker switches have flipped downwards. If they have, you have either overloaded a circuit with too many electrical appliances or one of those electrical appliances is faulty.

Does tripping a breaker damage it?

Ground fault The circuit breaker trips and resetting it is only a temporary solution. Ground faults are very hazardous as there is a risk of electrical shock, putting the whole home in danger. The only way to fix the problem is to find the underlying cause, and it is best to call an electrician to handle the issue.

Can a thermostat trip a breaker?

Most common reasons why your thermostat breaker keeps tripping. As we’ve said at the beginning of this article, a circuit breaker normally trips because of a circuit overload, a short circuit, or a ground fault. They are the most common reasons for your thermostat breaker to keep tripping.

Where is the reset button located on a heat pump?

Rheem and Ruud usually place their reset button near the bottom of the outdoor unit; the units with a reset button, in general, have it on the outside of the heat pump. Units that don’t have a button can be reset with the power switch and the circuit breakers.