What is a Platon membrane?
What is a Platon membrane?
Platon is a rugged, dimpled High Density Polyethylene (HDPE) membrane that keeps wet soil away from the foundation wall. Any moisture that may find its way past the membrane is carried to the foundation drain by the air gap drainage path.
How do you install a Platon membrane?
Begin Installation Platon can be sawn to height while rolled up. Standing the roll on the footing when unrolling Platon is easiest. Excess membrane (if any) may be folded out and cut even with the footing edge. Crease the Platon sharply at the footing/wall corner and lay flat on the footing to prevent pull-down.
What is Dimple mat?
What is a dimple mat? A dimple mat is a sheet of semi-rigid plastic (usually high-density polyethylene) that comes in a roll. The plastic has an egg-carton shape, with protruding dimples that make the membrane fairly thick — generally between 1/4 inch and 1/2 inch thick.
What is foundation wrap?
What is Foundation Wrap? One of the most critical parts of any home is the foundation, and protecting it from water is non-negotiable. In order to do that you need a foundation wrap. Simply put, foundation wrap acts as a waterproof barrier, keeping water from getting into your home through the foundation.
What is form a drain?
FORM-A-DRAIN® is the 3-in-1 foundation solution that forms footings, provides an integrated drainage system, and can be easily adapted to vent radon where needed. Designed for residential basement applications, Form-A-Drain consists of lineal sections installed as the foundation footing forms.
What is dimpled membrane used for?
What is it used for? SUPERSEAL Dimpled Membrane is a permanent waterproofing and drainage membrane that can be installed on any type of foundation, used as a subfloor, under floor slabs, and retrofit applications.
What is Dimple board used for?
An Effective Method of Controlling Water The DRY-UP™ Dimple Board is a very tough and long lasting plastic membrane that prevents moisture from passing through. It is also “dimpled” to allow a wall to breathe, allowing moisture to condensate outward so it falls by gravity to a drainage system.
How long is form a drain?
12 feet long
With simple adaptations, Form-A-Drain Plus can perform as part of a radon reduction system. Lineals are 12 feet long, are available in profile heights of 4″, 6″, 8″ (2¼” width) and 10″ (1½” width), and weigh between 7 and 14 pounds depending on profile .
What is used for concrete forms?
While timber is most common, there are other materials that are used for concrete forms, including steel, plywood, and fiberglass. In addition to timber, there are a few other common materials used to make concrete forms.
