What is HP auto document feeder?

The technical term automatic document feeder (ADF) describes an part of an device which allows it to automatically pick up several paper sheets and feed them one page at a time into the device.

What is a printer auto document feeder?

An automatic document feeder (ADF) is a feature in printers, photocopiers, fax machines or scanners wherein a stack of paper put into the machine and is then automatically fed through it, allowing the user to print, scan or copy without having to manually place each page into the machine.

How do I scan using HP automatic document feeder?

Scanning two-sided documents from the ADF

  1. Slide the Duplex switch located near the ADF to the left. This puts the scanner in Duplex mode.
  2. Open HP Solution Center. Click Start.
  3. Click Scan Document. The HP Scanning dialog box displays.
  4. Click Scan.
  5. After the scan is complete, click Done.

How do I change my scanner to feeder?

It’s easy to switch between the document feeder and the glass on your scanner:

  1. Click the Scan button.
  2. To scan from the glass, select “Use Flat Bed” OR.
  3. To scan from the feeder, de-select “Use Flat Bed”
  4. To make this change permanent, click the “Save” button right above that section of options.

Is ADF useful in printer?

An ADF is a great feature to have when used properly. It gives you the ability to feed several pages into a multifunction printer, scanner or copier, allowing you print print, copy or scan multiple pages at once without having to manually insert each piece of paper.

Is an automatic document feeder worth it?

How do I use HP printer document feeder?

How do I use automatic document feeder?

Follow the steps below to load documents in the Automatic Document Feeder. Slide the right edge guide all the way to the right. Insert the document stack face up in the Automatic Document Feeder until it meets resistance, then move the right edge guide so it is flush with the right edge of your documents.

How do I use document feeder?

Using the Document Feeder

  1. Remove any staples, paper clips, etc.
  2. Move the side guides outward as far as they will go.
  3. Place the document set to be scanned or copied face up in the center of the document feeder input tray.
  4. Move the side guides inward.
  5. Make any programming choices in the user interface.
  6. Click .