How do I fix PXE-E61 media test failure on Dell laptop?

Troubleshooting a media test failure Boot your computer and enter your BIOS Setup. Check that the boot sequence is not configured for network boot. Make sure your hard disk is listed in the boot sequence. Try making your hard disk the first device in your boot order using the keys shown at the bottom of your screen.

What is PXE-E61 media test failure check cable?

It’s common to see a PXE-E61 error message on a computer that’s inadvertently trying to boot to a network device when one doesn’t actually exist. This is often caused by a misconfigured setting in the BIOS but could be caused by a failing hard drive.

How do I disable Intel boot agent Dell?

Start the pc when it first starts repeatedly press F2 till you get to BIOS SETUP UTILITY. Press the right arrow the the BOOT menu. In the submenu arrow down to PXE BOOT to LAN. Disable it.

How do I fix no bootable device?

How to fix no bootable device on Windows 11/10/8/7?

  1. Method 1. Remove and connect back all hardware components.
  2. Method 2. Check boot order.
  3. Method 3. Reset primary partition as active.
  4. Method 4. Check internal hard disk status.
  5. Method 5. Fix boot information (BCD and MBR)
  6. Method 6. Recover deleted boot partition.

What is PXE ROM in BIOS?

PXE (Preboot eXecution Environment) is a boot environment that allows the Intel Desktop Board to boot up using a network interface, instead of booting from an installed hard drive. You can enable or disable PXE boot in the BIOS.

How do I fix no boot device?

How to fix “No Boot device found” on Windows 10

  1. Restart the computer and tap Esc to enter the BIOS interface.
  2. Press the right arrow key on your keyboard until the Boot tab is opened. Move “Hard Drive” to the top of the boot order list by pressing “+” or “-”.
  3. Press F10 to save the changes and restart the computer.