What does 1993 mean on a placard?

1993 Placard – Class 3 Flammable Liquid.

What is a hazmat 2?

A Level 2 incident involves “hazardous materials beyond the capabilities of the first responders on the scene and could be beyond the capabilities of the public sector responders having jurisdiction.”

What is a Class 2 fire hazard?

Class II–Liquids having a flash point at or above 100°F and below. 140°F (60°C) such as kerosene. • Class IIIA–Liquids having a flash point at or above 140°F and. below 200°F (93.4°C) such as fuel oil #6.

What is a Category 2 flammable liquid?

Category 2 shall include liquids having flashpoints below 73.4 °F (23 °C) and having a boiling point above 95 °F (35 °C).

What product is placard 1993?

UN 1993 Flammable Liquid Placard — Diesel n.o.s. Pre-printed with a UN Number, these Hazard Class 3 placards meet the requirements of 49 CFR 172.500 for domestic and international shipments of hazardous materials by highway, rail and water. Your compliance is our top priority.

What is UN Number 1993?

Flammable liquid placards display UN 1203 or UN 1993, hazard class 3, and meet hazmat placarding requirements.

What are the divisions of class 2 hazardous materials?

Class 2 has three divisions: Flammable (also called combustible), Non-Flammable/Non-Poisonous, and Poisonous. This classification is based on the United Nations’ Recommendations on the Transport of Dangerous Goods – Model Regulations.

What are the HAZMAT levels?

What are the Levels of HAZMAT Suits?

  • Level A Suits | The highest level of protection and require SCBA equipment.
  • Level B Suits | Protect against liquid splashes and require SCBA equipment.
  • Level C Suits | Protect against liquid splashes and require an APR.
  • Level D Suits | Lowest level of protection.

Which of the following is listed as a Class 2 hazardous material?

Gases that are known to cause these and other health risks are known as Class 2 Compressed Gases, and fall within one of three divisions: 2.1 Flammable gas. 2.2 Non-flammable, non-poisonous. 2.3 Poisonous gas.

What is a Class 2 chemical?

Class II liquids are combustible liquids that have a temperature flashpoint at or above 100 °F (37.8 °C) and below 140 °F (60 °C). Typical Class II liquids include liquids such as camphor oil, diesel fuel, pine tar, methanol, and other solvents.

What are Type II liquids?

Class II liquids are combustible liquids that have a flash point at or above 100 °F (37.8 °C) and below 140 °F (60 °C). Typical Class II liquids include liquids such as camphor oil, diesel fuel, pine tar, and Stoddard solvent.

What are Class I II and III liquids?

Class II: Liquids with a flash point at or above 100°F and below 140°F (60°C). Examples: No. 1, 2 and 3 fuel oils, kerosene, and hexyl alcohol. Class IIIA: Liquids with a flash point at or above 140°F and below 200°F (93°C).