How do I get to advanced options on DStv Explora?

Press MENU to display the Main Menu. Select “Advanced Options” and press OK, then select the “Local Time” option and press OK. If you want to change the time, select the options and press OK.

How do I change settings on DStv Explora?

Press the DStv button and go to “User Preferences” in “Settings” to set your preferences for default language, aspect ratio, recording defaults and more. If you have connected your DStv Explora 2 to the internet, use Connected Services on this menu to enable the features.

How do I get extra view settings?

To check the status from the xtraview settings menu, first, click on the help option. It will bring up a menu, and you can click on the general information option. Among the options available here is the extra view status check, and you can click on it. It will show the status of all your connected decoders.

How do I set public channels on DStv Explora?

TO VIEW public channels,

  1. press the “TV button” on your remote control.
  2. The “Bouquet Options” menu will appear. Select “Public PAS7/10” Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels.
  3. Simply select the channel you wish to view and press ok to view.

How do I install DStv wizard?

Running the installation wizard on the HD decoder

  1. Press the blue “DStv button”
  2. Use the right arrow to go to “Settings”
  3. Scroll down to “Satellite Settings”
  4. Then choose “Home Network”
  5. Select “Launch Installation Wizard” then press “OK” on the remote.
  6. Choose the satellite that matches your country.

How can I increase DStv signal strength?

How To Fix Signal Strength On DStv?

  1. Check F-type connectors. Check for incorrectly connected F-type connectors on the LNB and at the back of the decoder.
  2. Correct the LNB alignment.
  3. Adjust satellite dish alignment.
  4. Replace a faulty LNB.
  5. Move your satellite dish.
  6. Cut down or prune trees that may obstruct the signal.

How do you connect extra view on Explora Ultra?

All you have to do is run your RG6 cables from your DStv Explora to the uniport cables at the back of your smart LNB. These ports will be easy to find when you look at the back of your DStv Explora decoder. Ensure you have connected the smart LNB to the secondary decoders and you are all set.

How do I activate public channels on DStv?

How to set-up public channels on DSTV

  1. Press the MENU button. Select “ADVANCED OPTIONS” and press OK.
  2. Press menu Select “Advanced Options” Select “Dish Installation”
  3. Select “Network 3 Setup”
  4. Select “Network 4 Setup”
  5. Select “Network 5 Setup”
  6. Select “Network 6 Setup”
  7. Select “Network 7 Setup”
  8. Select “Network 8 Setup”