Will any speakers work with any receiver?

In short, yes basically any surround set will work. Just watch the ohm load. Most home receivers are only stable from 6ohm to 8ohm. If you go with 6-ohm speakers they will pull a little more power from the receiver and be a little louder.

What happened Paradigm speakers?

Today, Paradigm is still located in Canada — only now they have their own research facility and their own 33,000 cubic foot anechoic chamber.

How do I know if my speakers are compatible with my receiver?

Amplifiers usually operate best and are rated within a specified range, like between 6 and 12 ohms. By checking the specs of your amp and speakers, you can find out whether they’re compatible.

Do all speakers work with all receivers?

Most receivers and amplifiers are compatible with today’s leading speaker options. You should, however, study the specifications first. To match your speakers with a quality amplifier and receiver setup, you’ll need to know about impedance. Impedance is a speaker’s resistance.

Is paradigm a good speaker brand?

It’s a Top Choice for a an “affordable premium” speaker system. They may be big, expensive and undeniable heavy, but Paradigm’s Persona 9H speakers are outstanding in every respect, from the superb quality of build and finish to their scintillating sound.

Is Paradigm made in China?

The 601 S3 was made in England and cost $450 USD. The current 685 (essentially the same speaker) is made in China and costs $650.

Is a receiver necessary for surround sound?

So do you need a receiver for surround sound? For traditional speakers, a receiver is highly recommended, almost always required. For active Soundbars with wireless or satellite speakers, a receiver is not needed. Passive Soundbars will require the use of a receiver.

Are Paradigm speakers efficient?

A powerful amplifier is not needed to reach loud levels with these speakers since a couple watts is already more than enough to drive them to over 90 dB at 1 meter. These speakers are relatively efficient.