How do I stop my Timex Expedition from beeping?

To turn on/off alarm and hourly chime, press START/STOP repeatedly. Watch will step through four combinations of alarm and chime settings.

What does Chrono mean on a Timex watch?

CHRONOGRAPH. This mode provides a chronograph (stopwatch) function. Press MODE to go to Chrono mode. To start, press START·SPLIT. Chrono counts up by hundredths of a second up to one hour, then by seconds up to 100 hours.

How do you reset a Timex watch?

  1. Touch the watch screen to bring up your apps.
  2. Swipe left, then select Settings.
  3. Swipe down and select Factory Reset.
  4. Enter Code (last 4 digits of IMEI), then select YES.

How do you set an alarm on a Timex watch?

How to Set a Timex Alarm

  1. Plug in the Timex alarm clock.
  2. Set the time by referencing an accurate watch or clock.
  3. Hold down the “Alarm Set/Reset” button.
  4. Slide the “Loudness” switch to “Gentle” or “Loud” to set the preferred volume of the alarm.
  5. Press the “Alarm Set/Reset” button when the alarm sounds.

How do I turn off the hourly chime on my Timex t80?

Hold the button down until the colon in between the hour and minutes on the display screen stays solid. This means that the hourly chime is turned off. Conversely, if you hold the “Start/Stop” button down until the colon flashes intermittently, this means that the chime is turned on.

How do you set a Timex Expedition vibration alarm watch?

In the set time mode press mode till it displays “ALRT” then press + or – to change to VIBE (vibrate) or COMBO (vibrate and beeps) or Tone (beeps) which is the default, press Set (done) to exit. If you set the Beep to on then it will beep every time you press a button.

What do the 3 dials on a watch mean?

A chronograph watch typically has three dials to register the time elapsed – a second dial (also referred to as a sub-second dial), a minute dial and an hour dial.

Do Timex watches have alarms?

But now Timex has three nice and inexpensive solutions: the 41731, 41701, and the 41741. All are simple, nice-looking, affordable analog watches with easy-to-set vibrating alarms. The Timex Vibrating Alarm line actually has two types of alarms: the over 60-minute alarm, and the under 60-minute alarm.

How do I change a Timex battery?

How to Change a Watch Battery

  1. Remove the watch back. Most modern watches have snap-off back panels, which have small indentations to help you carefully pry off the cover.
  2. Place the gasket to the side.
  3. Find and remove the battery.
  4. Insert the new battery.
  5. Test your work.
  6. Replace the gasket and watch back.