How much HP can a 3800 Series 2 Handle?

a stock bottom end 3800 will handle about 850 crank horsepower.

What cars have a 3800 Series 2 supercharged?

The vehicles covered by the GM engine recall were outfitted with the 3800 Series II design, manufactured between 1995 and 2004….Here’s the full list:

  • 1997-2003 Buick Regal.
  • 2000-’03 Chevrolet Impala.
  • 1998-’99 Chevrolet Lumina.
  • 1998-2003 Chevrolet Monte Carlo.
  • 1998-’99 Oldsmobile Intrigue.
  • 1997-2003 Pontiac Grand Prix.

How much horsepower does a 3800 Series 2 supercharged have?

The M62 supercharger was manufactured by Eaton, for the GM 3800 SI engine. HP was rated at 205 for 1991-1993 engines (Gen2 supercharger) with a 2.55-inch (65 mm) pulley, and 225 for 1994-1995 engines(Gen3 Supercharger).

How much horsepower can a 3800 V6 have?

The 3800 Series III engine, found in the Grand Prix, offered 200 horsepower for the sporty sedan base model. The supercharged 3800 Series III, found in the Grand Prix GT or GTP (depending on model year), unleashed 260 horsepower.

Is the 3800 Series 2 supercharged?

The most popular versions of the 3800 were the series II and series III motors produced from 1996 – 2009. It is a 3.8 liter V6 engine utilizing pushrods for its 2 valves per cylinder. The 3800 was offered in naturally aspirated as well as supercharged configurations.

Why did GM stop making the 3800?

GM couldn’t get consistent quality from the difficult-to-cast aluminum blocks, so it dropped the engine after just two years. But the basic design and technology were resurrected for an iron block, a 198-cubic-inch V6.

How much horsepower can I get out of a 3.8 V6?

145-150 hp
In box stock form, the 3.8L Essex V-6 produces 145-150 hp at the crankshaft. According to Super Six Motorsports, that’s 0.625 hp per cubic inch or 38.2 hp per liter.

What is a 3800 Series 2?

The 3800 is the last engine series in a long line of Buick V6s that dates back to 1961. The most popular versions of the 3800 were the series II and series III motors produced from 1996 – 2009. It is a 3.8 liter V6 engine utilizing pushrods for its 2 valves per cylinder.

What kind of engine does a GM 3800 Series II have?

The GM 3800 Series II engine, introduced in 1995, is quite a different engine from its predecessor, the Series I engine. While the stroke for the 3.8L engine remained at 3.4” (86 mm), and the bore remained at 3.8” (97 mm), the engine architecture changed dramatically.

When did the Ford 3800 get a new motor?

The 3800 was completely updated in ’95 when it became the Series II motor that was lower, lighter, smoother and more powerful than any of its earlier variations. Amazingly, it’s been installed in more than 6 million vehicles since 1995.

What kind of engine does a Goodwrench 3800 have?

In addition to a new aluminum cylinder head for the 3800 Series II and III V-6s, it has developed a crate-engine program that offers the buyer a number of options, including connecting rods. Results 1 – 12 of 66. Every new or remanufactured 6 cylinder Goodwrench engine is made to the same exacting engineering standards that go into every new GM.

What kind of supercharger does a Ford 3800 have?

Better in almost every way, the 3800 V6 offered improved head flow and a hydraulic roller cam, but ditched the intercooled turbo for an Eaton M90 supercharger. Rated at 240 hp, the L67 was soon replaced by the 260 hp L32. The additional power came from revised heads and an improved (Gen 5) version of the Eaton M90 supercharger.