Why is my HP Laserjet printer printing streaks?

Streaking is usually caused by a worn out drum unit or spent toner cartridge. Drum units are a consumable and only need to be replaced after the use of 3 or 4 toners. Not all printers use a separate toner and drum unit.

How to clean hp laserjet 1018 printer?

Load the transparency or paper in the input tray. Print a cleaning page….Print a cleaning page.

  1. Access the product Properties dialog box.
  2. Click the Configure tab.
  3. In the Cleaning Page section, click Start.
  4. Click OK to begin the cleaning.

Why is my HP printer printing black streaks?

Small quantities of dust, hair, fibers, and other debris can build up inside an HP Deskjet printer causing streaks or smears.

How do you fix a streaky printer?

If your print-outs are streaky, faded, have lines on them that should not be there, or are otherwise poor in quality, this may be due to a problem with the printer or a low ink or toner supply. You may be running out of ink or toner. Check your ink or toner supply and buy a new cartridge if necessary.

What causes streaks when printing?

Sometimes an inkjet printer’s cartridges will cause streaks. This happens when the cartridge nozzles become clogged and distribute an uneven amount of ink onto the page. If your printer uses cartridges that have the printer “heads” built into them, those could be dirty and need cleaning.

Why does my printer leave streaks?

How do I stop my print from streaking?

Different ways to prevent streaks

  1. Tip 1. Replace the cartridges or toner cartridges.
  2. Tip 2. Use the maintenance program.
  3. Tip 3. Check for toner powder residue in the printer.
  4. Tip 4. check the print settings.

How do I clean the rollers on my HP printer?

Cleaning the paper feed rollers

  1. Turn off the all-in-one and unplug the power cord.
  2. Remove the rear access door.
  3. Clean each roller using a clean lint-free cloth lightly moistened with water (distilled water preferred).
  4. Rotate the rollers to clean the entire surface.

How do you fix printer streaks?

Fixing the Blank Areas:

  1. Make sure the issue is in the printer (not the document or the printing software), and find out which printhead needs cleaning.
  2. Make sure ink cartridges are not low or dried up.
  3. Use built-in cleaning functions.

How do you fix black streaks on a printer?

If your printer is leaving black lines down the page when you print, or dirty streaks/blank areas across the page, we can certainly help!…Solution:

  1. Clean the rollers.
  2. Replace the toner if you have a new one spare, it could be defective or running out.
  3. Replace the drum unit.
  4. Replace the fuser unit.