Is machine guarding training required?

OSHA requires any worker who uses hazardous machines to undergo specific and detailed training in the following: a description and identification of the hazards associated with particular machines. the safeguards themselves, how they provide protection, and the hazards for which they are intended.

Is machine guarding training required by OSHA?

OSHA requires that machines that expose an employee to injury must be guarded. A point of operation is the area of the machine where the machine performs work on a material such as cutting, shaping, boring, and forming.

What are the requirements for a machine guards?

Machine safeguards must meet these minimum general requirements:

  • Prevent contact: The safeguard must prevent hands, arms or any other part of a worker’s body from contacting dangerous moving parts.
  • Be secure: Workers should not be able to easily remove or tamper with the safeguard.

Which ANSI standards cover requirements for machine safeguarding?

The ANSI B11 standards provide a framework to identify and address machinery safety hazards and implement machine guarding through task-based risk assessment.

What are the 4 types of machine guards?

There are four general types of guards:

  • Fixed.
  • Interlocked.
  • Adjustable.
  • Self-adjusting.

At what height must flywheels be guarded?

All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform.

What are the three basic means of safeguarding machinery OSHA?

Machine Guarding eTool All machines consist of three fundamental areas: the point of operation, the power transmission device, and the operating controls.

What is the criteria for a guard having to be used on a machine quizlet?

Guards and safety devices should be made of durable material that will withstand the conditions of normal use. They must firmly be secured to the machine. A safeguard defeats its own purpose if it creates a hazard of its own such as a shear point, a jagged edge, or an unfinished surface which can cause a laceration.

What is machine guarding OSHA?

Machine guarding. 1910.212(a)(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.

What are the five different types of machine guarding?

Types of Machine Guards

  • Fixed guards.
  • Interlocking guards.
  • Adjustable guards.
  • Self-adjusting guards.

What are the three categories of machine guarding?

They are:

  • Guards – these are physical barriers that prevent contact.
  • Devices – these limit or prevent access to the hazardous area.
  • Automated Feeding and Ejection Mechanisms – These eliminate the operator’s exposure to the point of operation while handling stock (materials).