What causes P2017 code?

Intake manifold control valves and position sensors (IMRC valve/sensor) assist the powertrain control module (PCM) in calculating the volume of air entering the intake manifold in order to manage the engine’s air-fuel ratio. Your PCM may register code P2017 if it detects an electrical circuit fault in Bank 1.

Where is the intake manifold runner position sensor Bank 1?

Bank 1 sits on the side of the engine where the #1 cylinder is located. Bank 2 refers to the side of the engine with the #2 cylinder. However, inline engines only have one bank.

What does intake manifold runner control stuck open bank 1 mean?

Essentially, this is the part that controls how fuel gets pumped into the part of the engine that combusts fuel to produce power. This system is controlled by the powertrain control module, which means if the actuator is stuck open, it might be a problem with either the intake manifold or the powertrain control module.

How do I fix code P2017?

What repairs can fix the P2017 code?

  1. Replacing a faulty intake manifold control solenoid.
  2. Thoroughly cleaning the intake manifold.
  3. Cleaning the mass airflow sensor.
  4. Repairing damaged wiring related to the circuit of the intake manifold runner.
  5. Repairing an open or short related to the circuit of the intake manifold runner.

What does intake manifold runner do?

the intake manifold runner control system improves the engine airflow process, which helps performance and efficiency. although each carmaker’s design is different, the basic concept involves opening and closing butterfly valves within the intake manifold. the valves divert airflow, changing the length of the runners.

How do I fix code P2008?

What repairs can fix the P2008 code?

  1. Intake manifold runner flaps unstuck.
  2. Wiring harness replaced or repaired as needed.
  3. Intake manifold runner control solenoid replacement.
  4. Repair of poor electrical connection.

What are the symptoms of a cracked intake manifold?

Bad or Cracked Intake Manifold Symptoms

  • Check Engine Light.
  • Misfires.
  • Rough Idle.
  • Loss in Engine Performance.
  • External coolant leaks.
  • Engine Overheating.

How do I fix error code P2004?

P2004 Code (Symptoms, Causes, and How to Fix)

  1. #1 – Check For Accompanying Codes.
  2. #2 – Inspect All Vacuum Hoses (if applicable)
  3. #3 – Inspect IMRC Wiring.
  4. #4 – Inspect IMRC Plates and Linkage.
  5. #5 – Command Operation Via Scan Tool.

https://www.youtube.com/watch?v=m6ohjJxs8pU