How do I find the plumbing diagram for my house?

Contact the builder or architect. You might find a book with basic housing plans that match your home to get a better idea as most homes with similar floor plans are the same with regard to the plumbing, electrical and framing.

Where can I find drainage plans for my house NSW?

Where can I find drainage plans for my house? You can ask the selling agent for a drainage diagram or ask your conveyancer to provide one. Alternatively, you can get one from major plumbing suppliers – your water provider will list outlets on their websites.

Who is responsible for sewerage in Sydney?

Sydney Water is responsible for the wastewater pipes from our network up to the property connection point. The blockage is likely to be in Sydney Water’s pipes if: the overflow is visible beyond your property boundary, for example, from a maintenance hole located on public land.

How deep is a sewer line Sydney?

House drains shall be designed at 1 in 40 with a minimum depth at the head of the line of 0.5m to invert. A grade of 1 in 60 is acceptable for control of allotments in residential low density areas and in areas with flat terrain.

How do I find the main water line to my house?

For homes built on a slab, check in the garage or near your water heater. The incoming water line usually comes through the foundation near the front side of your house. Follow this line up to the water meter. Just past the meter should be the main water shut-off valve, a red or green handle or knob.

How do I get plans of my drains?

You generally have two options when it comes to finding the drainage system beneath your property. You can reach out to your local council and ask them to send you your drainage plan. The other option is to contact your local drainage experts and ask them to map your drains.

Can I see the drainage plans for my house?

To find the drains on your property, consult with your local council to search for the drainage plans for your property based on the age of your property. A CCTV drain survey can also map and record the drainage system on your property if you are unable to find property deeds.

What is a sewerage diagram?

What does a sewer diagram show? Sewerage Service Diagrams (SSD) show the location of the private house sewer lines on a property to where they connect to the authorities wastewater system.

Is the water board responsible for blocked drains?

Detached houses. Assuming a detached property in London has no shared drains, then the homeowner is responsible for the drains up to the property boundary, and Thames Water is responsible for all blockages or repairs off your property.

Can you build over a sewer line NSW?

You must not build over wastewater (sewer) maintenance structures. For us to access reticulation wastewater (sewer) maintenance structures, we need an unobstructed passageway with a minimum width of 900 mm and minimum clear headroom of 2.4 m.

How big is the main sewer pipe?

4 inches
Depending on your local plumbing codes, the main sewer line for residential homes is usually 4 inches in diameter. You may think if the pipe were larger, more waste could travel without getting clogged.