What grease do you use for electric motors?

NLGI 2 grade grease
A NLGI 2 grade grease is the most commonly used in electric motor applications. ASTM D 3336 oxidation life. require a grease with an EP additive. Dropping Point: The dropping point gives an indication of the temperature at which the grease will melt or the oil will separate from the thickener.

Can you put grease in electric motor?

Electric motors require lubricants with specific characteristics. Use of the wrong grease often leads to early electric motor failures. The grease consistency preferred for electric motors is normally NLGI 2 or 3, with a base oil viscosity of 100-150 cSt @ 40°C.

Should electric motors be greased?

Regularly greasing your electric motor bearing is an important part of electric motor maintenance. When applied correctly, the right grease will protect your electric motor’s bearing against damaging corrosion, reduce wear caused by friction, and act as a seal against contaminants.

What color is electric motor grease?

Electric Motor Bearing Grease: Blue, Polyurea, 13.7 oz, Cartridge, NLGI Grade 2.

What is NLGI grade for grease?

The NLGI consistency number (sometimes called “NLGI grade”) expresses a measure of the relative hardness of a grease used for lubrication, as specified by the standard classification of lubricating grease established by the National Lubricating Grease Institute (NLGI).

How often should I grease an electric motor?

When the operating temperature is between 80°C – 100°C (176°F – 212°F), oil should be replaced at least every three months. For critical equipment, it is advisable that lubricating oil be analyzed at least every three months to determine when oil replacement is necessary.

What’s the difference between red grease and blue grease?

Dark blue – typically for multipurpose greases made from conventional oil base stocks. Red – mostly for multipurpose synthetic greases. Grey – for those containing moly for many off-road equipment specifications, and. White or undyed greases – typically used in paper machines or food-grade applications.