How do I reset my QNAP password without losing data?

Please refer to the picture above and hold the reset button for 10 seconds. You will hear two beeps, one at 3 seconds and one at 10 seconds to let you know the reset has been successful. In this case, This restores the default system settings without deleting the user data.

What is the default admin password for QNAP?

admin
The default admin password is admin. You can log in to the NAS with admin/admin after resetting the NAS.

How do I reset my QNAP TS 412?

Go to Control Panel > System > Backup/Restore > Restore to Factory Default. Click Restore Factory Defaults & Format All Volumes. Choose to restart or shut down the NAS after the system is reset. Click OK.

How do I reset my QNAP to factory settings?

This restores the default system settings and formats all disk volumes.

  1. Go to Control Panel > System > Backup/Restore > Restore to Factory Default.
  2. Click Restore Factory Defaults & Format All Volumes.
  3. Choose to restart or shut down the NAS after the system is reset.
  4. Click OK.

How do I hard reset my QNAP?

QNAP QTS

  1. Log into your QNAP NAS.
  2. Go to Control Panel > Backup / Restore > Restore to Factory Default.
  3. Select from the following: Reset Settings. Restore Factory Defaults & Format All Volumes (hard reset) Reinitialize NAS (hard reset)
  4. Click OK.

How do I change my NAS password?

There are two ways to change your password:

  1. Type passwd from a Pleiades or Lou front-end system (PFE or LFE) and follow the prompts.
  2. Use the NAS Password Change Form (you’ll be prompted to authenticate via NASA’s Access Launchpad).

How do I restore my QNAP to factory settings?

How long does it take to reset QNAP?

Hard Reset (10 Seconds) That is, it completely resets the system settings to default. Data on the drives will remain intact, however, you’ll need to create the same network shares on the NAS in order to retrieve the old data.

How do I login to my QNAP NAS?

Accessing the NAS Using a Browser

  1. Verify that your computer is connected to the same network as the NAS.
  2. Open a web browser on your computer.
  3. Type the IP address of the NAS in the address bar. The QTS login screen appears.
  4. Specify your user name and password. The default user name and password is admin .
  5. Click Login.