What are the dimensions of a standard furnace?
What are the dimensions of a standard furnace?
Technical Specification
| Make | American Standard |
|---|---|
| Configuration | Horizontal |
| Annual Fuel Utilization Efficiency | 80 % |
| Stages of Flame | 1-stage |
| Dimensions | Height: 34 inches Width: 17.5 inches Depth: 28 inches |
How much space do you need for a furnace?
30 inches
A general standard is to have at least 30 inches of space between the walls and a furnace’s sides. When you hire a professional HVAC contractor near you, a pro will design the space according to your local area’s codes and ensure that the room maximizes your furnace’s performance and efficiency.
How is furnace size measured?
The size of a furnace is based on how much heat it can produce in an hour, as measured in BTUs, or British thermal units. A BTU is the energy required to heat a pound of water by one degree Fahrenheit. The higher the BTU rating a furnace has, the more warmth it can provide.
What size furnace is needed for a 1500 square foot house?
between 45,000 to 90,000 BTUs
A 1,500-square-foot home will require between 45,000 to 90,000 BTUs. A 1,800-square-foot home will require between 55,000 to 110,000 BTUs. A 2,100-square-foot home will require between 65,000 to 125,000 BTUs.
How big is an attic furnace?
The minimum measurements for an attic furnace tunnel are 30 inches high, 22 inches wide, and 20 feet in length. The dimensions must be large enough to remove the largest heating, ventilation, and air conditioning system or furnace appliance put on the roof.
Can you put a furnace in a closet?
Do not install your furnace in a storage closet. Any type of flammable material, including insulation, needs to be removed before installing the furnace.
Can I enclose my furnace?
Many homeowners intend to use basements or other areas where a furnace may commonly be installed as an additional space. This can be for simple storage, using the space as an entertainment or receiving area or other reasons. The answer is yes, of course you can enclose your furnace.
Do you include basement when sizing furnace?
The information is based on conventional window space (<15%), insulation and building construction (8 ft. ceiling height). When including a finished basement, use 1/2 of the finished basement square footage with the rest of the area being calculated.
What size furnace do I need for 1700 sq ft house?
76,500 BTU
Chart For Furnace Tonnages And BTUs For 500 – 3,000 Sq Ft Houses
| House Size (Sq Ft): | Furnace Size (in BTUs): |
|---|---|
| 1500 sq ft home | 67,500 BTU furnace |
| 1600 sq ft home | 72,000 BTU furnace |
| 1700 sq ft home | 76,500 BTU furnace |
| 1800 sq ft home | 81,000 BTU furnace |
What is furnace cabinet?
The cabinet is not an integral part of the furnace; however, it is often used to support components, including the burner, blower and heat exchanger. The cabinet may also be used to contain house air flowing through the furnace. In this sense, part of the cabinetry is acting as a duct system.
